DIMMING OR BRIGHTENING LIGHTS CONNECTED TO MODULES
Turn on the module by pressing the button on the remote control that corresponds to the module's unit code. Then
press 
or 
on the remote control to dim or bright- en the light. Hold the button down until you see the de- sired brightness level.
Note: Because the control center only turns a lamp/appli- ance on or off, you cannot use the control center receiver to dim/brighten a lamp/appliance connected to it.
LOCAL CONTROL OF MODULES
Even through your lights and appliances are connected to Plug ’N Power modules, you can still turn most of them on locally using their power switches.
•For most products, simply turn the power switch off and back on again.
•For
•You cannot manually turn on
20