Radio Shack Wireless Remote Control System owner manual Connecting Lights Appliances to Modules

61-2576.fm Page 17 Wednesday, September 8, 1999 1:50 PM

Set the selector switch dial on the remote control to 1–8 if you want to control the lamp and appliance set from 1 to 8, or control from 9 to 16 if you set the selector switches to 9–16 .

CONNECTING LIGHTS AND

APPLIANCES TO MODULES

After setting the desired house codes and selector switch, place the supplied labels in the boxes next to the buttons on the remote control to remind you of what each button controls.

Set the power switch on the light or appliance to the ON position. Then plug the light or appliance into the receiver and plug the receiver into an outlet.

17