Radio Shack Wireless Remote Control System owner manual Controlling Additional Modules

Page 18

61-2576.fm Page 18 Wednesday, September 8, 1999 1:50 PM

Follow the procedure in “Controlling Additional Modules” to test each receiver module. See “Intercom Systems” on Page 28 if your system does not work properly.

CONTROLLING ADDITIONAL MODULES

1.Set the remote control's slide switch to the group of 8 modules you want to control (1–8or 9–16). For exam- ple, if you set the switch to 1–8 , the buttons on the remote control will control modules set to 1 through 8.

Notes:

Button 1 can also turn the receiver module on or off.

One side of the supplied label has numbers for modules 1 through 8 printed on it, and the other side has numbers for modules 9 through 16. Use the side of the label that matches your installation.

2.Install additional Plug ’N Power modules (sold sepa- rately) as desired, following the instructions included with them.

18

Image 18
Contents Wireless Remote Control System Features Plug ‘N Power Precautions Safety PrecautionsFm Page 4 Wednesday, September 8, 1999 150 PM Contents HOW Plug ‘N Power Works Setting CodesHouse Code Unit Code Placing the Control Center Module Installing Batteries PreparationSetting the System Fm Page 12 Wednesday, September 8, 1999 150 PM Setting UP Additional Modules Fm Page 14 Wednesday, September 8, 1999 150 PM Fm Page 15 Wednesday, September 8, 1999 150 PM Setting the Module Codes Connecting Lights Appliances to Modules Controlling Additional Modules Fm Page 19 Wednesday, September 8, 1999 150 PM Local Control of Modules Dimming or Brightening Lights Connected to ModulesAdding Another Center Adding Other Controllers Wireless Home Security System Cat. No -2551A Troubleshooting Symptom SuggestionFm Page 25 Wednesday, September 8, 1999 150 PM Fm Page 26 Wednesday, September 8, 1999 150 PM Care and Maintenance Intercom Systems Power Interruptions FCC Statement Fm Page 31 Wednesday, September 8, 1999 150 PM Limited Ninety-Day Warranty