Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE owner manual Programming a TV/VCR Combo

USER’S GUIDE

ASSIGNED TO A DEVICE KEY. IF YOUR ORIGINAL REMOTE OPERATES MORE THAN ONE DEVICE (FOR EXAMPLE, A RECEIVER, CD PLAYER, AND CAS- SETTE PLAYER IN ONE REMOTE), YOU NEED TO SET UP EACH DEVICE SEPARATELY.

•WRITE YOUR CODE IN THE BOXES PROVIDED ON PAGE 26, FOR QUICK, EASY REFERENCE.

Devices types that can be set up under the following mode keys:

- TV	- VCR	- DVD
	- CASSETTE PLAYER	- LASER DISK PLAYER
	- DIGITAL AUDIO TAPE	- XBOX
	- PVR	- PLAYSTATION2

- SATELLITE	- AMP/TUNER	- CD PLAYER
RECEIVER	- AMPLIFIER	- HOME ACCESSORY
- CABLE BOX	- HOME THEATER

-VIDEO ACCESSORY

To set up a second TV,VCR, SAT, CD, AUD or DVD, see page 36.

Programming a TV/VCR Combo

1.Find the codes for the devices you want to pro- gram in Setup Codes for TV/VCR Combos on page 55 and write them down or highlight them.

2.Turn on the TV/VCR Combo and insert a video- cassette.

3.Press and release VCR.

4.Hold down P for at least 3 seconds. The bottom of the IR Indicator blinks twice, and a circle appears around P.

5.Enter your four-digit code using the number keys. The bottom of the IR Indicator blinks once after each of the first three digits are entered, and blinks twice after the fourth digit to confirm that a valid four-digit code has been entered.

6.Aim your remote at your TV/VCR and press POWER. If your television switches off, your remote should be ready to control your TV/VCR.

Quick Start Guide 11