USER’S GUIDE
•IF YOU CANNOT CONTROL YOUR TELEVISION PROPERLY, PLEASE CONTINUE THE SEARCH METHOD AS YOU MAY BE USING THE WRONG CODE.
•DURING STEP 5, IT IS ALSO POSSIBLE TO SEND ANOTHER SIGNAL INSTEAD OF THE POWER SIGNAL. SIMPLY PRESS ANY OF THE FOLLOWING KEYS DURING STEP 5 INSTEAD OF THE POWER KEY: 0, 1, 2, 3, CH+,
VOL+, PLAY OR STOP. IF, FOR EXAMPLE, DURING STEP 5 YOU PRESS “2” INSTEAD OF “POWER”, THE REMOTE WILL SEND THE “NUMBER 2”
SIGNAL (MAKE SURE YOUR TV IS SWITCHED TO A CHANNEL OTHER THAN
2).
•IF NO KEY IS PRESSED WITHIN 30 SECONDS DURING STEP 5, THE REMOTE EXITS THE SET UP MODE AND RETURNS TO THE CODE PREVIOUSLY SET UP BEFORE STARTING THIS PROCESS.
•TO SEARCH FOR YOUR OTHER DEVICES, FOLLOW THE SAME INSTRUCTIONS
ABOVE, ONLY PRESS THE APPROPRIATE DEVICE KEY DURING STEP 2 AND
5.
•IF YOUR VCR’S ORIGINAL REMOTE CONTROL DOES NOT HAVE A POWER KEY, PRESS PLAY INSTEAD OF POWER DURING STEP 5.
Congratulations! You should now have your remote set up to operate your home entertain- ment components. For instructions on how to operate advanced features of your remote, like Favorite Channel Scan,Volume Lock, and Macros, see page 27.
Quick Start Guide 13