Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE owner manual Learning Feature

Page 32

6-IN-ONE

THE LEARNING FEATURE (CONTINUED)

2.Hold down P on your remote for at least 3 sec- onds. The bottom of the IR Indicator blinks twice, and a circle appears around P.

3.Press 9 7 5 on your remote. The bottom part of the IR Indicator blinks twice.

4.Press the device key on the remote to select the mode to which you want to copy the learned function (Example: TV key).

5.Press the key (Example: M4 key) on the remote where you want to place the learned function. Incoming IR blinks on and off three times on the IR indicator. Then the screen switches off.

6.Hold down the original remote’s key (Example: mono/stereo key on your original remote con- trol) until your remote’s display switches back on. The IR Indicator blinks twice if it is learning successfully. A long blink indicates failure.

7.If you want to copy other functions within the same mode, simply repeat steps 5 and 6, press- ing the next key you want to copy.

8.To exit the learning mode, hold down P. The bottom part of IR Indicator blinks four times.

AS SOON AS THE DISPLAY SWITCHES OFF IN STEP 5, YOU NEED TO PRESS THE KEY ON YOUR ORIGINAL REMOTE WITHIN 5 SECONDS. OTHERWISE, THE REMOTE WILL EXIT THE LEARNING MODE.

AFTER 30 SECONDS OF INACTIVITY WHILE IN LEARNING MODE, THE REMOTE WILL RETURN TO USER MODE.

DURING LEARNING, KEYS SUCH AS (TV) MENU WILL NOT CHANGE SCREEN WHEN PRESSED.

IF YOU LEARN A FUNCTION ON ANOTHER KEY BESIDES M1, M2, M3, OR M4, THE ORIGINAL FUNCTION IS OVERWRITTEN.

IF YOU WANT TO LEARN A FUNCTION ON A KEY THAT IS NOT IN THE MAIN SCREEN, USE THE SCREEN KEY TO CHANGE THE SCREEN.

THE LEARNING FEATURE IS MODE SPECIFIC. THEREFORE YOU CAN PLACE ONE LEARNED FUNCTION PER MODE ON THE SAME KEY.

THE REMOTE CAN LEARN APPROXIMATELY 25 FUNCTIONS.

YOU CAN REPLACE A LEARNED FUNCTION BY PLACING ANOTHER LEARNED FUNCTION ON TOP.

LEARNING SHOULD NOT BE DONE IN DIRECT SUNLIGHT OR UNDER INCANDESCENT LIGHTS.

MAKE SURE YOU ARE USING NEW BATTERIES BEFORE FOLLOWING THE INSTRUCTIONS ABOVE.

UPON CHANGING THE BATTERIES, YOUR LEARNED FUNCTIONS WILL BE RETAINED.

32 The Learning Feature

Image 32
Contents IN-ONE Table of Contents Setup Codes for Pvrs USER’S GuideIntroduction Quick Start Guide Battery NotesTo Install Batteries IR infrared Indicator PowerKameleon panel Device keysDigit keys +100VOL + LastSelect Directional keysLeft VCR / DVD / SAT / CD / AUD transport keys28. TV/VCR / A-B 29. M1, M2, M3, M4Direct code set up Been enteredProgramming a TV/VCR Combo Search Method Signal Make Sure Your TV is Switched to a Channel Other than Introducción Guía DE Inicio Rápido Instalación DE BateríasPanel Kameleon Teclas de aparatosTeclas numéricas Teclas direccionales KeysSUR SND / Sleep Configuración directa de código Método de Búsqueda 22 Guía DE Inicio Rápido Guía DE Inicio Rápido KEY Table VCR DVDUP Rear + Code Verification VCR CBL/SAT DVD AudioVolume Lock To unlock the volume control for a specific modeTo cancel the volume lock across all modes Favorite Channel Scan TwiceUsing Channel Scan Learning Feature Learning Feature To delete all learned functions within a certain mode Using Macros Press TV, POWER,VCR, POWER, SATTo erase the Macro from M4, press Reassigning Mode Keys TV CodeResetting a Device KEY Upgrading Your Remote USER’S Guide Troubleshooting ProblemSolution Specifications FCC StatementCare Limited 90-DAY Warranty Bility of Such DamagesCat. No 12/02 Fort Worth, Texas JVC RCAADC GPXJBL KLHLXI NADCódigos DE Configuración Para Convertidores DE Cable ABCTDK DKKMTC 0558, 0623 GOI HTSAOC CXCJCB KECKTV MGASSS NECNTC Setup Codes for TV/VCR Combos TMKSetup Codes for Vcrs Códigos DE Configuración Para CCEHI-Q MEISTS Sansui 0000, 0067, 0209 Setup Codes for Xbox USER’S Guide 05A03