PREPARATION
INSTALLING BATTERIES
Your remote control requires four AAA batter- ies (not supplied) for power. For the best per- formance and longest life, we recommend RadioShack alkaline batteries.
Cautions:
•Use only fresh batteries of the required size and recommended type.
•Do not mix old and new batteries or differ- ent types of batteries.
•Do not press any of the remote control's keys while installing batteries.
Note: You do not need to reprogram your re- mote control after removing the batteries, be- cause no stored information is lost during battery replacement.
1.Press the battery compartment cover's tab and lift off the cover.
2.Place the batteries in the compartment as indicated by the polarity symbols (+ and
3.Replace the cover.
When the remote control's range decreases or it stops operating properly, replace the batter- ies.
Caution: Always remove old or weak batteries. Batteries can leak chemicals that can destroy electronic parts.
Warning: Dispose of old batteries promptly and properly. Do not burn or bury them.
Note: Do not place objects on top of the re- mote control after you have installed the batter-
5