If necessary, repeat these steps for each de- vice.
Note: Some VCRs and CD players do not have a POWER key on the original remote. If so, manually turn on the VCR, insert a tape or CD, and repeat the manual code search using PLAY instead of POWER. When the device responds, press P. The red light blinks twice.
Determining the 4-Digit Code
After you set up your remote control using the manual code search, you can find which
1.Press the device key you want to get the manufacturer's code from, then hold down P until the red light blinks twice.
2.Press 9 9 0. The red light blinks twice again.
3.Press 1, then count the number of times the red light blinks. This is the first digit of the
Note: If the red light does not blink, the digit is a 0.
4.Repeat Step 3 three times to find the sec- ond, third, and fourth numbers of the 4- digit manufacturer's code, pressing 2, 3, and 4 respectively for each additional digit.
15