Radio Shack 4-in-One Smart Light-Up Remote Control Fm Page 9 Wednesday, October 20, 1999 1203 PM

15-1993.fm Page 9 Wednesday, October 20, 1999 12:03 PM

1.Place your original remote control nose-to- nose with the RadioShack Smart Light-Up Remote Control.

2.Hold down P until the red light blinks twice, then press 9 7 5. The red light blinks twice again.

3.Press the device key (TV, VCR, CBL, or AUX) for the mode where you want the function to reside.

Note: You can program each smart key for a different function in each of the four modes. For example, 1s might serve as a MENU key in TV mode and a TRACKING key in VCR mode.

4.Press one of the smart keys. The red light blinks rapidly.

5.Hold down the key that you want to copy on your original remote until the red light on the 4-in-One Smart Light-Up blinks twice.

6.Hold down P until the red light blinks twice.

7.Press the smart key you programmed. The key should control the same function as the key that you copied from your original remote.

8.Repeat Steps 1–7 to program other smart keys.

9