Speco Technologies DVR-IP4CF user manual Operating Procedure, Power On, Monitoring Mode

Page 12

7.OPERATING PROCEDURE

7.1Power On

When powered on, the DVR will auto-detect its peripherals (self-testing, warm-up, auto detects the hard disk and starts CF-card testing, and etc.)

The system will detect the video input and judge whether the video system is NTSC or PAL. When video input is unable to be detected (VIDEO LOSS), the system will send out an alarm, press any button to stop the alarm (it will not affect the actual recording). Always connect cameras to the DVR before powering up to properly detect the cameras.

7.2 Monitoring Mode

This mode is the default for our system after power on. Under this mode, system supports live view for monitoring. Press《REC》button, the system enters the record mode, press《PLAY》button to start playback, press《MENU》button to enter the menu setup display. During record or playback, press《STOP》button to stop the current activity and returns to monitoring mode. Under the main menu, press《MENU》 to return to monitoring mode.

During playback, press《STOP》button to return to monitoring mode. Press FF to change the speed (FF1, FF2 or FF3), or press《REW》button to start reverse playback.

~To reset the DVR to factory defaults (under quad or single display), press 《PAUSE》button 5 times, the message《ALL SETTING DATAIS INITIALIZED.》 will be displayed by flashing 3 times, and after reset the password will be set as default value (111111).

~When the reset procedure has been completed, the message“DVR RESET COMPLETED. TURN THE DVR ON & OFF＂will be displayed, then please restart the DVR.

11

DVR-IP4CF

Page 11 Page 13
Image 12
Page 11 Page 13
Contents E R M a N U a L Index Troubleshooting Specifications Safety Precautions Do not spill liquid of any kind on the productIntroduction Product IntroductionApplication Features Replaces a conventional VCRPacking List Installation Connectors on the Rear PanelName and Function of Each Part Front Panel Buttons and ControlsPlay LED Rear Panel Buttons and Controls Operating Procedure Power OnMonitoring Mode Timer Record Alarm Record M MIX Record Record DisplayPlayback Display Time Search Hard Drive MasterDVR-IP4CF System Setup MenuSystem Setup Time SET Password SET Password Change Load Default Press《ENTER》button to show the display aboveCamera Setup CH1 Title CAMERA1 Camera Setting Record Setup Record Mode TIME+MOTION+SENSOR Buzzer Setup Sensor TypeSensor Type Event List Time Search Event Search Event Search Begin ： END ：CF Card Setup Select Time Copy FORMAT/ Erase Hard Drive Setup HDD Format Network DVR Setup Network OperationOnline with Dhcp Server Connecting Network DVR Online without Dhcp ServerOnline using Intranet or Fixed IP Online using Adsl PPPoE RouterOnline using Ddns Server Online Connection Install ActiveX Start-up ActiveX Control DVR-IP4CF Main Display Live DisplayView RotateImage Recording Image Recording Setup Display Save as JpegSave as AVI DVR Control Setup Quality SettingSave Current Picture Configuration Resolution SettingAdvance Settings System SettingUser Setting User Authorization SettingNew user/ Change Password Network Setting Fixed IPDelete User Connect to Adsl by PPPoE mode DhcpDdns Setting DVR-IP4CF Firmware Update DVR-IP4CF Hardware Installation Software InstallationSystem Requirement Hardware RequirementSoftware Playback Interface Description User InterfaceDVR-IP4CF DVR-IP4CF DVR-IP4CF Parameter Setup Troubleshooting Question AnswerSpecifications 4CH, BNCMemo
Top Page Image Contents