Venturer SHD7000 owner manual Setup, Check the Type of Video Input on Your TV, Connecting to a TV

SETUP

Check the Type of Video Input on Your TV

To view high definition content, use the HDMI OUTPUT jack or the COMPONENT VIDEO OUTPUT jacks to connect to a TV. Some discs may require use of the HDMI OUTPUT jack.

TV input		Connection to this player		Resolution from this player
			HD (High Definition)		SD (Standard Definition)
	Signal	Cable	1080i	720p	480p	480i
HDMI input	Video	HDMI cable	Yes	Yes	Yes	Yes
( Most
recommended)	Audio
	Video	Component
		Video cable
Component			Yes	Yes	Yes	Yes
Video input
	Audio	Audio cable
VIDEO input	Video	Composite
		Video cable	No	No	No	Yes
(Yellow)
	Audio	Audio cable

Some disc may prohibit output in this format. In this case, use the HDMI connection.

Why HDMI connection is most recommended?

HD DVD and DVD video disc creators have the option to include copy protection instructions in their discs that prohibit the output of some standard video or high definition video (original 720p, 1080i or up-converted 480i or 480p) from the COMPONENT VIDEO OUTPUT jacks. If such instructions are present in the disc you are playing, you must use the HDMI OUTPUT jack to view the disc in a high definition format and the COMPONENT VIDEO OUTPUT jacks, if activated, will output video only in 480i or 480p resolution.

Connecting to a TV

•Connect the player directly to your TV. If you connect the player to a VCR, TV/VCR combination, video selector or AV amplifier, the playback picture may be distorted due to copy protection.

•Be sure to turn off the power and unplug both units from the wall outlet before making any connections.

Via HDMI Input

HDMI stands for High Definition Multimedia Interface. HDMI transfers digital audio and uncompressed digital video on a single cable. As a result, audio cables and video cables don’t need to be connected separately to a device.

Notes:			VIDEO OUTPUT	VIDEO OUTPUT	TV
				Y
				COMPONENT
• Refer to the owner’s manual to the connected		OPTICAL	L	P B
			R	P R
			ANALOG AUDIO
		BITSTREAM	OUTPUT
TV as well.		/PCM
	LAN	DIGITAL AUDIO OUTPUT		HDMI
• When the HDMI connection is not verified,				To HDMI
an error message appears on the front panel				OUTPUT
display. In this case, disconnect the HDMI					To HDMI
					INPUT
cable then connect it again, or turn off the
connected HDMI device then turn it on.					HDMI Cable (Not supplied)

- 13 -