Venturer SHD7000 owner manual Via Component Video Input, RCA Audio/Video Cable

Page 15

SETUP

HDMI output is digital only. DVI analog is not supported.

HDMI is an evolving technology, so some devices may not operate properly with this player.

To get the most possible benefit from Dolby Digital Plus, you should connect your HD DVD player to your AV receiver using its HDMI input. If your AV receiver has this type of input, make sure it is connected to your HD DVD player and that the input is set to use audio from HDMI (and not the SPDIF coaxial or optical input). If your AV receiver does not have an HDMI input, then the next best choice is to use the SPDIF (coaxial or optical) input on your AV receiver.

If you use the SPDIF optical output or analog outputs to connect your audio system and have the “Digital Out HDMI” set to “Auto” or “PCM”, the audio output level from these jacks will be reduced when listening to a multi-channel disc. To restore the audio output level, set “Digital Out HDMI” to “Downmixed PCM”.

Via Component Video Input

Some discs may be down converted or require HDMI connection.

Using a component video cable (not supplied), connect the Y VIDEO OUT jack (green plug) on your unit to the Y VIDEO IN jack on your TV, the PB VIDEO OUT jack (blue plug) on your unit to the PB VIDEO IN jack on your TV and the PR VIDEO OUT jack (red plug) on your unit to the PR VIDEO IN jack on your TV.

To use the analog sound output, connect these ANALOG AUDIO OUTPUT jacks to audio input jacks on your TV using the audio cable.

To use the optical digital output, use an optical cable to connect this jack to an optical audio input on a device capable of processing a DTS bitstream or PCM audio (see “Connecting to an Audio System”).

 

 

VIDEO OUTPUT

Y

 

 

 

COMPONENT

 

 

 

VIDEO OUTPUT

 

 

L

P B

 

 

ANALOG AUDIO

 

 

BITSTREAM

OUTPUT

 

 

/PCM

R

P R

 

OPTICAL

 

 

LAN

DIGITAL AUDIO OUTPUT

 

HDMI OUTPUT

White Red

TV

Component video cable (not supplied)

Y

VIDEO

PB/CB

PR/CR

L

IN

AUDIO IN

R

Audio/Video cable

(not supplied)

RCA Audio/Video Cable

Use the Audio/Video cable (not supplied). Connect the VIDEO OUT and left/right AUDIO OUT jacks on the unit to the VIDEO IN and left/ right AUDIO IN jacks on your TV.

480i output only regardless of the resolution settings or the connections of other output jack.

 

 

VIDEO OUTPUT

Y

 

 

 

COMPONENT

 

 

 

VIDEO OUTPUT

 

 

L

P B

 

 

ANALOG AUDIO

 

 

BITSTREAM

OUTPUT

 

 

/PCM

R

P R

 

OPTICAL

 

 

LAN

DIGITAL AUDIO OUTPUT

 

HDMI OUTPUT

Yellow White Red

TV

Red

R

White

AUDIO IN

 

L

Audio/Video cable (not supplied)

VIDEO IN

Yellow

- 14 -

Image 15
Contents HD DVD player On Safety Safety PrecautionsSymbol for Class Double lnsulation On PlacementFCC Information Important Safety Instructions About software PrecautionsWhen not in use About the volume levelTable of Contents Features Important notes about HD DVD HD output jacksCertain system requirements Remote Control AccessoriesControl Reference Guide Remote ControlDisplay Button Setup ButtonAngle Button 15 I/ STANDBY/ON ButtonUnit Rear View Unit Front ViewDimming the display DisplayCheck the Type of Video Input on Your TV SetupWhy Hdmi connection is most recommended? Connecting to a TVRCA Audio/Video Cable Via Component Video InputVia Analog Audio Output Connecting to an Audio SystemLAN Connection Via Optical Digital OutputTurning on the Unit and TV Plugging in the UnitPlaying a Disc Subtitle Selection Slow-motion PlayAngle Selection Audio SelectionRepeat Playback Locating a Specific Chapter/Track Special FunctionsDisplay Function Locating a Specific TitleRequirements for HD DVDs/Web-enabled network content HD DVD Playing Options in the FutureLocating a Specific Time Enhanced Black Level Customizing the Function SettingsPicture TV ShapeRGB Output Range Picture ModeResolution Setting AudioDigital Out Spdif Digital Out Hdmi PCMDialog Enhancement Dynamic Range ControlLanguage Disc Menu LanguageSubtitle Language Ethernet Audio LanguageOn Screen Language If the setup is not successful Proxy SettingHow to input characters Network Speed Cookie SettingMAC Address NTP ServerGeneral Parental LockOff To change the password Clock SetOSD On/Off Screen Saver Remote Controller SoundPersistent Storage MaintenanceUpdate Firmware update InitializeSymptom Cause and Remedy Troubleshooting GuideEula Page No Warranty Exhibit B Page Page Page No Warranty Exhibit C Exhibit D Cleaning the Unit MaintenanceSpecifications Cleaning the Disc