Simaudio Calypso Audio Connections, Digital Audio Output Electrical, Digital Audio Output Optical

MOON Calypso DVD Transport / Player

Audio Connections

You can use either the analog audio outputs (if equipped), the digital audio outputs, or both depending on your system requirements. If you are using a digital surround processor, such as the MOON Stargate, it is recommended that you to use a digital audio connection. If you want to use your MOON Calypso-ADVD Player with an analog stereo preamplifier or integrated amplifier, you must use an analog audio output connection. If you are not sure, ask your dealer for recommendations about your specific setup. Whatever the type of connection(s) you choose, don’t hesitate to use high quality cables. Poor quality cables can degrade the overall sonic performance of your system.

G) Digital Audio Output (Electrical)

This output is on RCA type connector. You should use a 75Ω digital audio cable. This is the best of the two available digital audio connection with the MOON Calypso.

H) Digital Audio Output (Optical)

This output is on a Toslink (EIAJ Standard) type connector, requiring a Toslink fiber optic digital audio cable. Use this type of connection if the component you’re attempting to connect to the MOON Calypso doesn’t support the ‘Electrical Digital Audio Output’ previously described.

I) Analog Audio Output (Calypso-A only)

This output is on RCA connectors, so you must have a pair of audio cables with RCA terminations.

____________________________________________________________________________________

Audio Connections 10