Winegard SK-1000 installation manual Operation for Bell TV Users

Operation for Bell TV Users

1. Press and hold “POWER” for two	2. The interface will ask if you wish
seconds or until the TRAV’LER	to enter the user menu. Press the
interface displays “POWER ON.”	Select button to choose “Yes,”
Then, press and hold “ENTER for	and then press the Enter button to
two seconds.	confirm the selection.

3.The user menu consists of four choices: Search Mode, Diagnostics, Installation, and Exit. Press “SELECT” until the asterisk is next to “Installation,” and press “ENTER.”

	WINEGARD COMPANY		Enter User Menu?		Installation*
	POWER ON		*Yes No		Exit
4. The interface box will ask for a		5. Press the Enter button to choose		6. Press the Select button until the
password. Press “ENTER” four		“Select Antenna.”		asterisk is next to “SM Mount,”
times to enter code “0000.”				and then press “ENTER.”
	Install Password		Select Antenna*		LG Mount
	0000		Raise Antenna		SM Mount*

7.Enter code “0022” by pressing the Select button to increase each number. Press “ENTER.”

8.Press “SELECT” until the asterisk is next to “SM ExpressVu.” Press the Enter button.

9.Press the Select button until the asterisk is next to “Yes.” Press the Enter button.

SM Password	SM ExpressVu*	SM ExpressVu
0022	Installation	*Yes No

10.The interface will display “in progress” and then “Success.”

11.Press the Enter button. Press “SELECT” until the asterisk is next to “Installation.” Press “ENTER.”

12.Press the Select button until the asterisk is next to “Exit.” Press the Enter button.

SM ExpressVu	Installation*	Exit*
Success	SM DTV Triple	Select Antenna

13.The interface will ask if you want to turn the power off. Choose “No” by pressing the Enter button.

14.The interface will display the type of satellite dish on the top line.

15.The TRAV’LER antenna will enter the search routine as part of its normal operation.

Power Off?	SM ExpressVu	SM ExpressVu
Yes *No	Ready: Multi-Sat	Searching...

16. Upon finding a satellite, the		17. The TRAV’LER antenna will lock
antenna will fine-tune or “peak” on		onto two different satellites: 82°
a signal.		and 91°. The antenna will display
		an asterisk for each satellite found.
	SM ExpressVu		SM ExpressVu
	Peaking...		*91 *82

TIP If you want to turn off the power to the antenna after

the antenna has locked onto satellites, press “POWER” and “SELECT” at the same time.

Before traveling, make sure to press “POWER” and wait for the antenna to start to power up; then press “POWER” again to initiate the stow sequence.

2