Winegard LP-1000 operation manual Dish Network

Page 14

Appendix A Satellite Coverage Maps and Receiver Compatability

A.1 DISH NETWORK

The RoadTrip LP will operate with most standard DISH Network receivers.

The antenna will continually track satellite 119 and will function while stationary with satellites 119 and 110.

The RoadTrip LP will not operate with DISH Network HDTV receivers or with any DISH Network satellites other than 119.

Winegard does not recommend using receivers with hard drives not recommended by the manufactuer for mobile applications.

The RoadTrip will not operate in areas where satellite 119 is not avaliable.

Refer to Fig A.1.1 for an operational coverage map for satellite 119. Satellite coverage maps are based on level, stationary operation. When tracking with the RoadTrip, road grades, hills, on and off ramps and other inclines, may effect the operation when slope is severe, or when approaching fringe areas of operation. Reception interrup- tion may also occur during adverse weather conditions.

Fig A.1.1 DISH Network satellites 119 and 110 coverage area (Area shaded in blue indicates coverage).*

*Coverage maps are for reference only and do not guarantee coverage.

14

Image 14
Contents Satellite System Trademarks CongratulationsRoadTrip LP Model Number Appendix a Appendix BParts Provided with RoadTrip LP Installation SafetySystem Overview Operational Safety Unpack and Inspect the RoadTrip LP Installation OverviewTools and Material Required for Installation Select a Location to Mount the AntennaOption a Option B Hardware Kit Contents Mounting the Antenna Hardware KitAdjusting the Antenna Switch Settings Sat. Rcvr Mount OptionRoute and connect the coax and wires ON/OFF Initial Satellite Receiver Setup OperationSatellite Signal Interruption Tracking with the RoadTrip LPDish Network Directv Appendix B Setup and Operation of Satellite Receivers Using your Dish Network Point Dish/Signal ScreenUsing your Dish Network Receiver for Multidish Operation Fig B.1.2Using your DirecTV Receiver for MultiDish Operation Set up your Directv Receiver DishUsing the Directv Dish Pointing Screen Directv To activate your Directv receiver, callTighten coax connectors with wrench, Section Appendix C. Maintenance and TroubleshootingSymptom Warranty Procedure Appendix D. Specifications and WarrantySpecifications