Installing the Simplex Fiber Cable
1.Locate a 1000Base-X compliant simplex (1 strand) fiber cable with appropriate connectors.
2.Connect the fiber cable from the Media Converter Module to the other Media Converter/switch/fiber device.
Installing the Copper Cable
1.Locate 10/100/1000Base-T compliant copper cables with male, RJ-45 connectors installed at both ends.
2.Connect the RJ-45 cable between the Perle Media Converter Module and the device.
Note: The Perle Media Converter Module supports Auto-MDIX which allows a straight-through or cross-over Ethernet cable. See page 4 in this guide for jumper positions.
12 | Perle 10/100/1000 Media Converter Module – Instal lation Guide |
