Chapter 3 Mounting Overview

LEDs

The Install LED provides bridge association status during installation mode as shown in Table 3-2.

Table 3-2

Install LED Status

 

 

 

 

 

Install LED

 

Status

Bridge State

 

 

 

 

Off

 

Self test

Startup.

 

 

 

 

Amber blinking

 

Non-root, searching

Not associated (non-root mode). The

 

 

 

access point/bridge attempts to associate

 

 

 

with a root bridge for 60 seconds1.

Amber

 

Non-root, associated

Associated (non-root mode).

 

 

 

 

Green blinking

 

Root, searching

Not associated (root mode). The access

 

 

 

point/bridge attempts to associate with a

 

 

 

non-root bridge indefinitely.

 

 

 

 

Green

 

Root, associated

Associated (root mode).

 

 

 

 

Red

 

Error

Overvoltage or overcurrent error2

1.Preconfigured bridges search indefinitely.

2.Disconnect power to the power injector, wait approximately 1 minute, and reconnect power. If error continues, contact technical support.

Use the Install LED to determine when the bridge successfully associates with a remote bridge and to verify its mode of operation. After association, the other three LEDs indicate signal strength.

The startup and association sequence depends on the access point/bridge configuration, which can be one of the following types:

•Default—The access point/bridge attempts to associate with a root bridge for 60 seconds. If it does not associate with a root bridge, it attempts to associate with a non-root bridge.

•Preconfigured bridge mode—The unit attempts to associate with a remote bridge in the configured mode, either root or non-root. Because there are no timeouts, it is easier to align the antenna.

•Preconfigured access point or workgroup bridge modes—the bridge Install LED does not operate.

Aligning the Autonomous Bridge Antenna Using RSSI LED Indications

For the autonomous bridge, you can align the integrated antenna using LEDs after the unit successfully associates with a remote bridge. In the installation mode before association to another bridge, the Install LED blinks amber. If the unit associates to a root bridge, the Install LED turns amber. If the unit does not associate to a root bridge in the first 60 seconds, the Install LED blinks green to indicate that beacons are being transmitted and that the unit is waiting for another non-root bridge to associate.

During the first 20 seconds after association, the unit reads the receive signal strength indictor (RSSI) levels and records the maximum level received. After 20 seconds have elapsed, the Install LED turns amber and the Ethernet, status, and radio LEDs display the relative RSSI levels compared to the maximum received. The RSSI LED indications are shown in Table 3-3).

Note For the signal level (dBm), a smaller number represents a stronger signal because the signal level is given as a negative value.

Cisco Aironet 1300 Series Wireless Outdoor Access Point/Bridge Hardware Installation Guide

3-6

OL-5048-06

 

 

Page 49 Page 51
Page 50
Image 50
Cisco Systems 1300 manual Install LED Status
Page 49 Page 51

1300 specifications

Cisco Systems 1300 series, commonly referred to as the Cisco Aironet 1300 Series, represents a pivotal advancement in wireless networking solutions designed for outdoor environments. These access points are primarily intended for outdoor wireless applications, including temporary installations, public areas, and enterprises requiring robust outdoor coverage.

One of the standout features of the Cisco 1300 series is its ruggedized design. The access points are built to withstand harsh weather conditions, including extreme temperatures and precipitation. They comply with IP67 ratings, ensuring protection against dust and water intrusion, making them suitable for deployment in various environmental conditions.

The Cisco 1300 series provides comprehensive WLAN coverage through its support for various wireless standards, including 802.11b, 802.11g, and 802.11n. This compatibility ensures interoperability with existing wireless infrastructure while enabling faster data rates and improved connectivity. The technology leveraged in the Cisco 1300 series offers enhanced throughput and capacity, ensuring seamless connectivity for end-users.

Another key characteristic is the integration of advanced security features. The access points support robust encryption protocols, such as WPA2 and 802.1X, safeguarding sensitive data transmitted over the air. The ability to create secure guest access networks also enhances security, allowing organizations to provide internet access without compromising internal network safety.

Cisco's proprietary features, such as Cisco CleanAir technology, further enhance the performance of the 1300 series. This technology effectively detects and mitigates wireless interference, ensuring optimal performance and reliability in congested areas. Additionally, the series supports mesh networking capabilities, allowing for flexible deployment without the necessity of extensive wiring, which is particularly advantageous for temporary or mobile installations.

Management and configuration are simplified through the use of Cisco's Wireless LAN Controller (WLC). This centralized management allows network administrators to streamline firmware upgrades, monitor performance, and enforce policy compliance across multiple access points.

In summary, the Cisco Systems 1300 series access points combine robust outdoor capabilities with advanced wireless technology, security features, and ease of management, making them a valuable asset for organizations looking to extend their networking capabilities into outdoor environments. Through their durable design and innovative technologies, the Cisco 1300 series meets the demanding needs of today’s wireless landscape.
Top Page Image Contents