Cisco Systems 1300 manual Mounting the Access Point/Bridge, Mounting Hardware

Models: 1300

1 118
Download 118 pages 8.6 Kb
Page 46
Image 46

Chapter 3 Mounting Overview

Mounting the Access Point/Bridge

Mounting the Access Point/Bridge

Typically, the access point/bridge is installed on a rooftop, mast, tower, wall, or a suitable flat surface. Each of these installations requires a different approach. This document provides a mounting overview. For detailed mounting instructions, refer to the mounting instructions that shipped with your unit.

The access point/bridge is available in two configurations:

Integrated antenna access point/bridge (with 13-dBi)

External antenna access point/bridge (with two antenna connectors for use with a single antenna or dual diversity antennas)

Note Personnel installing the access point/bridge must understand wireless techniques, antenna mounting and adjustment, and grounding methods.

Note To meet regulatory restrictions, the external antenna access point/bridge unit and the external antenna must be professionally installed. The network administration or other IT professional responsible for installing and configuring the unit is a suitable professional installer. Following installation, access to the unit should be password-protected by the network administrator to maintain regulatory compliance.

The following warning applies to outdoor and vehicle installations:

Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Statement 1030

Mounting Hardware

The access point/bridge supports the following optional mounting kits:

The roof mount kit (for indoor or outdoor use) contains these items:

One roof-wall mount

Two dual-coax cables [20 ft (6.1 m) and 50 ft (15.2 m)]

Multi-function mount (consisting of a access point/bridge bracket and a mast bracket)

Two tower clamps (U-bolts) with four nuts and washers

Four bolts and washers for securing the access point/bridge bracket to the mast bracket

Four bolts for securing the access point/bridge bracket to the unit

Grounding block and mounting screws

Ground lug for the access point/bridge, two hex nuts, and two washers

Weatherproofing kit (consisting of Coax Seal and electrical joint compound)

The wall mount kit (for indoor use) contains these items:

Wall mount bracket with 4 mounting bolts and washers

Two sub-mini RG-59 cables (12 in or 30.5 cm)

Cisco Aironet 1300 Series Wireless Outdoor Access Point/Bridge Hardware Installation Guide

3-2

OL-5048-06

 

 

Page 46
Image 46
Cisco Systems 1300 manual Mounting the Access Point/Bridge, Mounting Hardware

1300 specifications

Cisco Systems 1300 series, commonly referred to as the Cisco Aironet 1300 Series, represents a pivotal advancement in wireless networking solutions designed for outdoor environments. These access points are primarily intended for outdoor wireless applications, including temporary installations, public areas, and enterprises requiring robust outdoor coverage.

One of the standout features of the Cisco 1300 series is its ruggedized design. The access points are built to withstand harsh weather conditions, including extreme temperatures and precipitation. They comply with IP67 ratings, ensuring protection against dust and water intrusion, making them suitable for deployment in various environmental conditions.

The Cisco 1300 series provides comprehensive WLAN coverage through its support for various wireless standards, including 802.11b, 802.11g, and 802.11n. This compatibility ensures interoperability with existing wireless infrastructure while enabling faster data rates and improved connectivity. The technology leveraged in the Cisco 1300 series offers enhanced throughput and capacity, ensuring seamless connectivity for end-users.

Another key characteristic is the integration of advanced security features. The access points support robust encryption protocols, such as WPA2 and 802.1X, safeguarding sensitive data transmitted over the air. The ability to create secure guest access networks also enhances security, allowing organizations to provide internet access without compromising internal network safety.

Cisco's proprietary features, such as Cisco CleanAir technology, further enhance the performance of the 1300 series. This technology effectively detects and mitigates wireless interference, ensuring optimal performance and reliability in congested areas. Additionally, the series supports mesh networking capabilities, allowing for flexible deployment without the necessity of extensive wiring, which is particularly advantageous for temporary or mobile installations.

Management and configuration are simplified through the use of Cisco's Wireless LAN Controller (WLC). This centralized management allows network administrators to streamline firmware upgrades, monitor performance, and enforce policy compliance across multiple access points.

In summary, the Cisco Systems 1300 series access points combine robust outdoor capabilities with advanced wireless technology, security features, and ease of management, making them a valuable asset for organizations looking to extend their networking capabilities into outdoor environments. Through their durable design and innovative technologies, the Cisco 1300 series meets the demanding needs of today’s wireless landscape.