Perle Systems S-100MM-XXXXX manual Overview, Fiber port 2 MM2/SM2

Overview

This document contains instructions necessary for the installation and operation of the Perle Fast Fiber to Fiber Standalone Media Converters (S-100MM). These products allow dissimilar 100Base- X fiber interfaces to connect to one another.

These are the fiber to fiber conversion models:

∙Multimode to Multimode (MM)

∙Multimode to Single Mode ..(SM)

∙Multimode to Single Mode Single Strand (SM)

The first fiber port will be MM and the second fiber port can be either single mode (SM) or multimode (MM) depending on the model selected. They can operate over different wavelengths and distances. (See tables below).

Fiber port 1 – MM1

	Model		Connector	Mode	Distance	Wavelength
						(TX/RX)
	All models		SC/ST/LC	MM.	2 km/1.2 mi	1310 nm
Fiber port 2 – MM2/SM2
		Model	Connector	Mode	Distance	Wavelength
						(TX/RX)
		S-100MM-M2xx2	SC/ST/LC	MM	2 km/1.2 mi.	1310 nm
		S-100MM-S2xx20	SC/ST/LC	SM.	20 km/12.4 mi.	1310 nm
		S-100MM-S2xx40	SC/ST/LC	SM	40 km/24.9 mi.	1310 nm
		S-100MM-S2xx80	SC/ST/LC	SM	80 km/49.7 mi.	1550 nm
		S-100MM-S2xx120	SC/ST/LC	SM	120 km/74.6 mi	1550 nm
		S-100MM-S1SC20U	SC	SM	20 km/12.4 mi.	1310/1550 nm
		S-100MM-S1SC20D	SC	SM	20 km/12.4 mi.	1550/1310 nm
		S-100MM-S1SC40U	SC	SM	40 km/24.9 mi.	1310/1550 nm
		S-100MM-S1SC40D	SC	SM	40 km/24.9 mi.	1550/1310 nm

Note: Please refer to Perle’s web site for the most up to date Installation guides, models and specifications:

http://www.perle.com/

Fast Fiber to Fiber Media Converter – Installation Guide 2