Perle Systems S-100MM-XXXXX Installing the Duplex Fiber Cable, Installing the Simplex Fiber Cable

Installing the Duplex Fiber Cable

Locate a 100Base-X compliant duplex (2 strands) fiber cable with appropriate connectors.

Connect the fiber cables from one media converter to the other media converter/switch/fiber device ensuring that the RX and TX are reversed at the opposite end.

Installing the Simplex Fiber Cable

Locate a 100Base-X compliant simplex (1 strand) fiber cable with appropriate connectors.

Connect the fiber cable from one Media Converter Module to another Media Converter/switch/fiber device.

Powering up the Media Converter

1.Connect the Perle supplied power adapter to the media converter.

2.Turn on the power at source.

3.Check that the PWR LED light is lit and on solid.

Fast Fiber to Fiber Media Converter – Installation Guide 7