Operation
Status LED
The Perle Gigabit Media Converter Modules have three single colored status LEDs located on the face plate of the module.
PWR - Power/Test
∙On: Power is on, module is operating normally.
∙Blinking slowly: the module is in loopback mode.
∙Blinking quickly: the module has a hardware error.
LK1- MM1 (Fiber Link10) Activity
∙On: Fiber link present.
∙Blinking quickly: Fiber link present and receiving data.
∙Blinking slowly: The fiber link has been taken down as a result of Smart Link
∙Off: No fiber link.
LK2- MM2/SM2 (Fiber Link 2) Activity
∙On: Fiber link present.
∙Blinking quickly: Fiber link present and receiving data.
∙Blinking slowly: The fiber link has been taken down as a result of Smart Link
∙Off: No fiber link.
Gigabit Fiber to Fiber Media Converter Module – Installation Guide
12