Palsonic DVD R 212 manual Manual Recording Start Recording, Recording Process Control

Page 17

Recording Mode

Manual Recording

Start Recording

1.Connect the system properly (see "System Connection: System Connection for Recording External Signals"), switch on the power, insert a recordable DVD+R or an non-finalized DVD+RW, and start playing the input source to output the signals to be recorded.

2.Press the "SOURCE" button to enter the Monitoring Mode.

3.According to the steps stated in the previous chapter (see "Monitoring Mode: the Selection of Monitoring Signals"), select the suitable input source.

The input source shall be in correspondence with the actual connection, otherwise the input source signals cannot be displayed on the monitor and the recording cannot be done, either. It is recommended to press the "SOURCE" button until the input source interface appears. If you have pressed the button more than 8 times, but the input source interface is still not available, the cause might be that the input source is not connected properly.

4.In the recording control bar menu, press the or "SELECT" button to select the option, use the or button to select the recording quality value and press the "SELECT" button to confirm.

5.In the recording control bar menu, use the or button to select the "Record" option, press "SELECT" button to enter the input mode, use the or button to select the "Record" value, and press the "SELECT" button to confirm.

The recording process starts after the above 5 steps.

Recording Process Control

button to select the "Quality" menu. Press the

Record (DVD+R)

Mode	New Title
Source	DV
Quality	SP
REC TO	DVD+VIDEO
TRICK	Record
Title	04/04
Chapter	02
Time	0:06:02/1:57:18

1.Use the or button to move the cursor, select the "Record" option, press the "SELECT" button to enter, use the or button to select a value, and then press the "SELECT" button.

You can select the corresponding value to complete the operations such as "RECORD", "PAUSE" and "STOP".

Record (DVD+R)

Mode	New Title
Source	DV
Quality	SP
REC TO	DVD+VIDEO
TRICK	Record
Title	04/04
Chapter	02
Time	0:06:02/1:57:18

STORE

PAUSE

RECORD

16

Image 17

Contents DVD Recorder Maintenance Notice Safety InstructionsTable of Contents Play Mode Introduction Enter the Title Editing modeDisc Operations Title EditChannel Scan Basic Information DVD+RW Disc Terms DVD DiscDVD+R Disc Erasing the DiscTrack Terms ChapterMultiple Angles function Multiple Languages functionRear Panel Front PanelRemote Control How to install and use the remote controller Connected to a TV System ConnectionConnect to an amplifier with digital decoder Connect to an ordinary stereo systemRear Panel of the Unit Recorder Front Navigation Mode Monitoring ModeSelection of Monitor Signals Use the menu to select monitoring signalsEnter the recording mode and menu description Recording ModeGeneral steps for recording external signals are as follows General StepsButton to select the Quality menu. Press Manual Recording Start RecordingRecording Process Control DV Controlled Recording One Touch Recording OTRPrograms, the unit can satisfy your need. Before setting up Timer RecordingTimer recording, set the system clock first. For Instructions, see System Setup System Clock SettingBox will appear on the right. Highlight the box and press Timer Recording Chapter Editing Entering the Chapter Editing ModeMenu Description Operation Steps Select the title to be editedChapter Marker Split TitleHide/Unhide Chapter Index PictureDisc Operation Enter the Disc Operation ModeOperation Steps Erase Disc Lock DiscRecord a New Title Rename DiscOverwrite Disc Finalize DiscTitle Editing Enter the Title Editing ModeEnter the Play Mode Play ModeOperation Direct PlayEnd Play Enter Menu before PlayingRandom Play Play Mode ControlNormal Play MP3 Play Mode Control Program PlayMenu Operation Play Process ControlStatus-play item and press the Select button Forward PlaySelection Play Mode Volume ControlPlay Process Control Pause/Step Play Chapter SelectionTime Selection Selection Play Mode Track SelectionTrack Selection Play for Audio Disc Audio Channel Selection Play Mode Use of the Goto ButtonAudio Selection Subtitle Selection Multi-angle SwitchPBC ON/OFF Available only for VCD 2.0 or above versions Picture Zoom FunctionOperational Interface and General Setup System SetupGeneral Settings Playback Settings Language SettingsRestore Factory Settings Screen Saver SettingsProgressive/Interlace Video OutRating Level TV Aspect Ratio SettingsAnalog Audio Output Digital Audio Output SettingsAuto Chapter Marker Recording SettingsRecording Quality Selection Use Button to select a desired value and pressSubtitle Language Settings Menu Language SettingsMeanings of the icons Audio Language SettingsChannel Scan System Clock Setting Standby Other OperationsAppendix Troubleshooting Guide Technical Specifications Technical SpecificationsSupported disc formats Supported recordable discTechnical Specifications Palsonic Customer Service Telephone