Palsonic DVD R 212 Timer Recording, Programs, the unit can satisfy your need. Before setting up

Page 19

Timer Recording

This function enables the unit to start recording according to the preset requirement once the scheduled time is reached. After the recording is done, the unit is in standby status. To start timer recording, set up a recording schedule at first and configure the system according to the requirement.

If you are busy and you don't want to miss interesting
If you are busy and you don't want to miss interesting		Record scheduler
programs, the unit can satisfy your need. Before setting up			Source	Quality	Date	Start	End
the timer recording, set the system clock first. (For			Source	Quality	Date	Start	End
the timer recording, set the system clock first. (For		W 1	Rear CVBS	SP	DAILY	07:03	08:33
instructions, see "System Setup: System Clock Setting").		2	Ch057	HQ	12/31/03	12:44	13:05
1. Press the "TIMER button to enter the timer		3
recording schedule setup menu, as shown in the chart to		4
recording schedule setup menu, as shown in the chart to		5
the right.		5
the right.		6
There are 20 records in this menu. Each record		6


represents a recording schedule.

2. In the timer recording setup menu, use the or button to select a record, and press the "Select" button.

3. Setup the input source

In the Item Editor dialog box, use the , and "Select" buttons to select the value of "SOURCE".

Item Editor

Source	Front AV
Quality	SP
Once	01/01/00
Start	12:44
End	13:15
Confirm	Cancel

4. Set up the recording quality

In the Item Editor dialog box, use the , and "SELECT" buttons to select the quality value. For more information about recording quality, see "Basic Information: Terms" for reference. HQ, SP, EP, SLP.

Item Editor
Source	Front AV
Quality	SP
Once	SLP
Start	EP
End	SP
	HQ
Confirm	Cancel

18

Image 19

Contents DVD Recorder Maintenance Notice Safety InstructionsTable of Contents Title Edit Introduction Enter the Title Editing modePlay Mode Disc OperationsChannel Scan Basic Information Erasing the Disc Terms DVD DiscDVD+RW Disc DVD+R DiscMultiple Languages function Terms ChapterTrack Multiple Angles functionRear Panel Front PanelRemote Control How to install and use the remote controller Connected to a TV System ConnectionRear Panel of the Unit Connect to an ordinary stereo systemConnect to an amplifier with digital decoder Recorder Front Use the menu to select monitoring signals Monitoring ModeNavigation Mode Selection of Monitor Signals General Steps Recording Mode Enter the recording mode and menu description General steps for recording external signals are as followsRecording Process Control Manual Recording Start RecordingButton to select the Quality menu. Press DV Controlled Recording One Touch Recording OTRInstructions, see System Setup System Clock Setting Timer RecordingPrograms, the unit can satisfy your need. Before setting up Timer recording, set the system clock first. ForBox will appear on the right. Highlight the box and press Timer Recording Operation Steps Select the title to be edited Entering the Chapter Editing ModeChapter Editing Menu DescriptionIndex Picture Split TitleChapter Marker Hide/Unhide ChapterLock Disc Enter the Disc Operation ModeDisc Operation Operation Steps Erase DiscFinalize Disc Rename DiscRecord a New Title Overwrite DiscTitle Editing Enter the Title Editing ModeDirect Play Play ModeEnter the Play Mode OperationEnd Play Enter Menu before PlayingNormal Play Play Mode ControlRandom Play MP3 Play Mode Control Program PlayForward Play Play Process ControlMenu Operation Status-play item and press the Select buttonChapter Selection Volume ControlSelection Play Mode Play Process Control Pause/Step PlayTrack Selection Play for Audio Disc Selection Play Mode Track SelectionTime Selection Audio Selection Play Mode Use of the Goto ButtonAudio Channel Selection Picture Zoom Function Multi-angle SwitchSubtitle Selection PBC ON/OFF Available only for VCD 2.0 or above versionsLanguage Settings System SetupOperational Interface and General Setup General Settings Playback SettingsVideo Out Screen Saver SettingsRestore Factory Settings Progressive/InterlaceRating Level TV Aspect Ratio SettingsAnalog Audio Output Digital Audio Output SettingsUse Button to select a desired value and press Recording SettingsAuto Chapter Marker Recording Quality SelectionSubtitle Language Settings Menu Language SettingsChannel Scan Audio Language SettingsMeanings of the icons System Clock Setting Standby Other OperationsAppendix Troubleshooting Guide Supported recordable disc Technical SpecificationsTechnical Specifications Supported disc formatsTechnical Specifications Palsonic Customer Service Telephone