Palsonic VCR9600 owner manual Set the On-screen Language, Initial Setting Up

Page 10

1. Set the On-screen Language

. Initial Setting Up

1.Select the language you want by using the buttons to display it inverted.

2.When you press the MENU button, that language is set and the CLOCK SET screen appears automatically.

CLOCK SET

SUMMER TIME ( OUT )

TIME

19

: 57

DATE

31

/ 1 TUE

YEAR

. 95

DATA = [ VV

]

 

SHIFT = [ < > ]

END = [MENU]

<-(OUT)-> (lN):

One hour automatically added to time

(IN)-> (OUT):

One hour automatically subtracted from time

. Changing the Language after the Initial Settings

1.Press the MENU buttonand call up the menu screen.

2.Select the language you want with the buttons.

3.When you press the MENU button, the selected language is set and the unit returns to the Menu screen.

LANGUAGE

ENGLISH

DEUTSCH

FRANCAIS

ITALIANO

ESPANOL

SELECT = [ VV ]

END =[MENU]

2. Clock Setting

. Initial Setting Up

Using the buttons

1.Select summer time in and out, then set this with the SHIFT > button.

2.Select the hour and minute and set them with the SHIFT> button.

3.Select the day and month and set them with the SHIFT > button.

4.Select the year and set it with the SHIFT > button.

5.When you press the MENU button, the clock starts. Next the AMS screen appears.

. Changing the Time after the Initial Setting

1. Press the MENU button to call up the menu screen,

select CLOCK SET with the buttons, then press the SHIFT> button.

2.Change the time according to Steps 1.-4 in the initial settings.

3.When you press the MENU button the clock starts

and the unit returns to the Menu screen.

Notes.

. When setting dates after 29th, set the month first. The <SHIFT> button can be used to move items.

3 AMS (Auto Memory System)

. Initial Setting Up

1.Press the SHIFT> button to start AMS.

2.AMS ends automatically and the unit returns to the Menu screen.

. To Execute AMS again after the Initial Setting

1. Press the MENU button to call up the menu screen,

select AMS with the buttons, and press the SHIFT > button.

2.If you execute AMS, the position data programmed in the initial settings is cleared.

3.To execute AMS, press the SHIFT> button. (The data previously stored in memory is cleared and AMS is executed again.) To cancel AMS, press the MENU button.

AMS

AMS START=[>]

- - - - - - - - - - - - - - - - - - -

QUIT=[MENU]

AMS

AUTO MEMORY SYSTEM

PROCEEDING

l l l l l l - - - - - -

QUIT=[MENU]

Note

If the power to the unit is cut off because of a power failure or the plug being unplugged from the socket, the initial settings must be made again. However, the channel preset memory is retained.

E-7

Image 10
Contents VCR-9600 How to Use This Manual Remote control unit Rear Panel Remote Control UnitFront Panel Multi-displayMaintain Good Ventilation Contents Introduction Power Supply Cable InstallationConnection of VCR and TV Using Audio/Video Connector Equipment ConnectionPreparations Changing the Time after the Initial Setting Initial Setting UpChanging the Language after the Initial Settings To Execute AMS again after the Initial SettingMenu Screen/Mode Screen Using the Menu ScreenOn Screen Display OSD AMS Operation Channel PresettingManual Tuning Automatic Channel ChangingChannel Selection Tuning with the V CH V ButtonsTuning with the Number Buttons Remote Control Only Selecting AUX PositionBasic Operation Auto Head CleanerPlayback Digital Tracking ControlStill Frame Special Effect PlaybackSearch Frame AdvanceZero Return Minute SkipBlueback Function Recording Counter Display One-touch Timer Recording OTRCounter Function Changing OTR DurationProgramming procedure Programmable Timer RecordingBefore programming When two programmes overlap Hints on ProgrammingSymptom Cause Remedy OthersSpecifications General Section Palsonic Customer Service Telephone