Palsonic VCR9600 owner manual Contents

CONTENTS

INTRODUCTION...........................................

RemoteControl Operation.......................

Video Cassette Tape...............................

INSTALLATION.............................................

Equipment Connection............................

TV Antenna.........................................

Connection of VCR and TV Using

Audio/Video Connector.......................

Power Supply Cable...........................

PREPARATIONS..........................................

Video Channel Setting............................

Initial Settings.........................................

Menu Screen/Mode Screen....................

On Screen Display (OSD).......................

CHANNEL PRESETTING.............................

AMS Operation.......................................

Manual Tuning........................................

Automatic Channel Changing.................

CHANNEL SELECTION...............................

Tuning with the V CH V Buttons.............

Tuning with the Number Buttons

(Remote Control Only)...........................

Selecting AUX Position..........................

PLAYBACK..................................................

Basic Operation......................................

Digital Tracking Control.....................

Full Auto/Auto Playback System.......

Auto Head Cleaner............................

E-4

E-4

E-4

E-5

E-5

E-5

E-5

E-5

E-6

E-6

E-6

E-8

E-8

E-9

E-9

E-9

E-9

E-10 E-10

E-10 E-10

E-11 E-11 E-12 E-11 E-11

SPECIAL EFFECT PLAYBACK	E-12
Search	E-12
Forward Search	E-12
Reverse Search	E-12
Still Frame	E-12
Frame Advance	E-12
SlowPlayback	E-12
1 Minute Skip	E-13
Zero Return	E-13
Blueback Function	E-13
RECORDING	E-14
Basic Operation	E-14
Checking the Picture Being Recorded	E-14
Recording One Programme While
Viewing Another	E-14
Auto Turn on System	E-14
Pause Function	E-14
REC Review	E-14
Recording from Another VCR	E-14
One-touch Timer Recording (OTR)	E-15
COUNTER FUNCTION	E-15
Counter Display	E-15
PROGRAMMABLE TIMER RECORDING	E-16
Before Programming	E-16
Programming Procedure	E-16
Hints on Programming	E-17
OTHERS	E-18
Specifications	E-19

ACCESSORIES

Before installing your VCR, please check you have the following items.

Coaxial Cable

Remote Control Unit

Owner’s Manual

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location. When the VCR is exposed to such a change in temperature, moisture may condense on the cylinder inside the machine.

If the VCR is operated as it is, the tape may stick to the tape head and cause damage to the tape and/or the deck. Under these circumstances, do not operate the VCR for about 2 hours. Leave the power cord connected so that the VCR can dry out.

E-3