Palsonic 76WSHDA, 86WSHDA External equipment connections, To connect DVD input terminals

Installation (continued)

External equipment connections (continued)

2. To connect DVD input terminals

The figure below shows how to connect the DVD input terminals of the TV set to the DVD Player,

Laser Disk Player, etc.

DVD Player,

Laser Disk Player etc.

COMPONENT	AUDIO
VIDEO OUTPUT	OUTPUT
G B R	W	R
Y CB CR L/MONO		R

:Direction of the signal		THE SET'S REAR
W :White (audio L/MONO)		AV1	AV2	AV
R :Red (audio R, CR)	RF
		IN	IN	OUT
G :Green (Y)		DVD IN		S-VIDEO
B :Blue (CB)	Y				VIDEO
	CB				L/MONO
	CR				R
		Y PBPR	HDTV IN		XGA
Signals

Press AV/TV button to display the signal source selection menu and select YCbCr mode. The picture shown on the screen is the program from the DVD Player.

Note: Both the component video Cr terminal and the audio R terminal are red for easy identification. Make sure these are correctly connected.

3. To connect AV output terminals

You can connect a stereo system to the audio output terminals (phono type) on the set to enjoy a high-quality sound from the stereo system. You can also connect AV output terminals to VTR to record programs being displayed on the screen (Note: Only when the signal source is input through RF or AV1 IN or AV2 IN or AV3 IN, there is signal for AV OUT terminals to output).

To external input

THE SET'S REAR

R

W

RF	AV1	AV2	AV
	IN	IN	OUT
	DVD IN		S-VIDEO

Y

CB

CR

Y PBPR

Y:Yellow (video)

HDTV IN

VIDEO	W
L/MONO	R
R	Stereo System
XGA
R	To audio input
	R

W:White (audio L/MONO) R :Red (audio R)

W		VHS
Y	W
	Y	(Another VTR for recording)
	To video input

9