Palsonic 76WSHDA, 86WSHDA owner manual OSD menu introduction & Operation examples

OSD menu introduction & Operation examples

OSD menu introduction (continued)

CONTRAST		Adjust the picture contrast.
BRIGHTNESS		Adjust the picture brightness.
H-SIZE		Adjust the picture's horizontal size.
H-PHASE		Adjust the horizontal position of the picture.
V-SIZE		Adjust the picture's vertical size.
V-PHASE		Adjust the vertical position of the picture.
PIN-BALANCE		Balance pincushion distortion.
PINCUSHION		Pincushion correction.
TRAPEZOID		Correct the trapezoid distortion.
PARALLELOGRAM		Adjust the angle between horizontal and vertical.
H-MOIRE		Eliminate horizontal moire.
V-MOIR		Eliminate vertical moire.
ROTATION		Rotate the current picture.
RECALL		To restore to original factory preset mode.
ENGLISH/CHINESE	?	English/Chinese menu on-screen display language
		selection.
DEGAUSS		Manually degauss the set
R	R	Adjust white balance R at current colour temperature
		(red adjustment).
G	G	Adjust white balance G at current colour temperature
		(green adjustment).
9300K	9300	Restore the current picture's colour temperature to
		9300K.
6500K	6500	Restore the current picture's colour temperature to
		6500K.
EXIT	EXIT	Exit the current OSD and store all the current
		adjusted parameters.

Notes:

When the HD monitor gets signal from external equipment (such as Set top box, computer, DVD, etc.) through XGA interface, because of signal difference, the screen colour may not be in optimum state, this time, you can adjust G and R item in the SCREEN ADJUST menu until you get satisfying colour.

Using 6500 or 9300 can restore the value of

G and

R to default setting.

31