Palsonic 76WSHD owner manual Default screen aspect ratio setting, Picture moving, Degaussing

11.4 Default screen aspect ratio setting

Making use of this function can set the default screen aspect ratio.

Enter into the OPTION menu, press

CH or CH button (3) to select Default, press VOL or VOL button (2) to cycle through 16:9, PANORAMA, 4:3, ZOOM, TITLE and make your choice to set the default screen aspect ratio. Later on, when you switch channels, the screen will remain in the default aspect ratio.

11.5 Picture moving

In OPTION menu, if you have set TITLE for default screen

aspect ratio, then P.MOV menu item will appear below WIDE item. Select P.MOV, then press VOL or VOL button (2) to move the picture downward or upward, thus to adjust the position of the title. After completion, exit the menu, and the title position will be memorised.

Note: If you set the current channel's screen to TITLE by pressing PANORAMA button, enter into the OPTION menu and adjust P.MOV, the title position can not be memorised.

11.6 Degaussing

If there occurs magnetisation, please do the following to degauss the set:

Enter into the OPTION menu, press CHor CH button (3) to select Degauss, then press VOL or VOL button (2) the degaussing circuit begins to work. If still can not degauss thoroughly, please repeat the above operation after 15-20 minutes until magnetisation disappear.

11.7 Blue screen setting

With the BLUE SCREEN function ON, the TV will automatically turn blue when no signal is being received. Otherwise snowy picture will appear on the screen when no signal is being received.

Enter into the OPTION menu, press CHor CH(3) to select BLUE SCREEN, press VOL or VOL (2) to switch between (ON )and X (OFF).

(3)

(2)(2)

(1)(3)