Palsonic 76WSHD To skip unnecessary position numbers, Fine Tune, AFC Auto Frequency Control

7.3 To skip unnecessary position numbers

After presetting the channels, you can
skip unnecessary position numbers so that
only the channels you want to watch are				(4)
selected with CH or CH button.	(3)	(1)
1) Press the number button (4) or CH
	(2)		(2)
button (3) to select a channel number		(3)

you want to skip.

2)Enter into the PRESET menu, press CH

button (3) to select SKIP.

3)Press VOLbutton (2) to select SKIP (ON). Thus, when you select

channels with CH button (3), this channel will then be skipped.

4)To restore a skipped position number, select the position number you want to restore with the number buttons, enter into the PRESET menu to select SKIP X (OFF).

7.4Fine Tune

When picture and sound's effect of a channel is poor (for example, one or two CATV channel's picture and sound are not standard), you can correct them by making use of Fine Tuning.

7.4.1 AFC (Auto Frequency Control)

(4)

(3)(1)

(2)(2) (3)

1) Press the number buttons (4) or CH button (3) to select the channel you

want to fine-tune.

2)Enter into the PRESET menu, press

CH button (3) to select AFC, then press VOL button (2) to select AFC to activate it, the set begins fine-tune until the optimum picture and sound is achieved.

To use AFC is recommended. If you are not satisfied with the effects after the AFC, you can shut down AFC and make use of FINE TUNE until you get satisfied effect.