Palsonic TFTV421080HD owner manual Memorizing the Channels, Auto Channel Search

Memorizing the Channels

When you turn on the TV for the first time, you should perform an auto channel search to set up stations on your TV. Note: Be sure to select the proper input source (ATV/DTV) before operation.

Auto Channel Search

You should perform an auto channel search to search for all channels available and stores them in memory.

And before you start Auto Tuning, it is necessary to select a country firstly.
1	Press MENU and the main menu screen displays.	Picture	Sound	Time		Option		Lock	Channel
		Auto T
2	Press 3or4to select Channel menu, press 6to access the menu.	DTV	Country Selection				Australia
		ATV Manual		Start			Cancel
3		Programme
	Highlight Auto Tuning item, and press 4or OK to access.
4	Now a confirmation box appears on the screen. Press 3or4to		Select			Move			Exit
	highlight Start item, and then press OK to begin the auto							Menu
	channel search.(If you want to cancel, press 4to select Cancel			Channel			Tuning
	item, and use OK to confirm.)
5				2 %...		78.50MHz		TV
	Then the TV begins memorizing all ATV/DTV channels available in			ATV	:2	Programme(s)
	your area. During the process, you can press MENU to skip the
				DTV	:0	Programme(s)
	search, or EXIT to stop.
				Radio	:0	Programme(s)
	Note			Press <Menu> to skip.
= In the confirmation box, the Country Selection item is defaulted to be Australia
				Press <Exit> to exit.
and cannot be adjusted.

Manual Searching for DTV programs

If desired digital programs cannot be searched by Auto Tuning, you can make use of DTV Manual Tuning to search programs manually.

1	In Channel menu, press 6or5 to select DTV Manual Tuning
	item, then press4or OK to access.
2	Highlight VHF CH item, press 3or4 button to select your
	desired channel number.
3	Press OK to begin the manual DTV channel search.
	At the bottom of the menu screen the DTV Signal strength bar is

	displayed. You can make use of it to check how strong your DTV
	signal is and whether you need to adjust your antenna or digital
	cable input. The higher the signal strength is, the less likely you are
	to experience picture degradation.
4	Then all the digital programs available in this channel will be
	searched and stored. During the process, you can press MENU to
	exit the search.

Picture	Sound	Time	Option	Lock	Channel
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
	Select		Move	Menu	Exit

DTV Manual Tuning
VHF	CH	6
Please select channel then
Press OK to search
Bad	Normal	Good
Menu	Exit	Select

15