Palsonic TFTV421080HD Stereo/Bilingual Selection for analog channels, Nicam Broadcast Selection

Page 24

Sound Adjustment (Continued)

Stereo/Bilingual Selection (for analog channels)

You can quickly select sound multiplex mode by using the STEREO button on the remote control.

NICAM Broadcast Selection

This enables the selection of the reception mode when receiving a NICAM signal. To let you enjoy NICAM broadcasting, this TV set receives NICAM system stereo, bilingual, and monaural broadcasts.

Stereo

When the TV set is receiving a stereo broadcast, press the STEREO button to select Stereo or Mono. When Mono is selected, the TV sound is output monaurally.

Bilingual

When the TV set is receiving a bilingual program, press the STEREO button to select NICAM DUAL A or NICAM DUAL B.

IGR (German stereo system) Broadcasts

This enables the selection of the reception mode when receiving an IGR signal. To let you enjoy IGR broadcasting, this TV set receives IGR system stereo and bilingual broadcasts.

Stereo

When the TV set is receiving a stereo broadcast, press the STEREO button to select Stereo or Mono. When Mono is selected, the TV sound is output monaurally.

Bilingual

When the TV set is receiving bilingual program, press the STEREO button to select NICAM DUAL A or NICAM DUAL B.

Audio Track Selection (for digital channels)

The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages, or different commentators for sport events). You can press STEREO button to select the audio track.

Note

=The availability of these additional “multi-tracks” depends upon the broadcaster.

22

Image 24

Contents N111 AUSTRALIA1300 657Table of Contents Important Safety Precautions Important Safety Precautions About After-Image Cleaning Maintenance Important NoticeUsing the Remote Control Installing the BatteriesPreparations Power Connection Antenna ConnectionSpeaker Connection Insert the AC plug into a conveniently located AC outletIdentification of Controls Main Unit front view/side viewPower Switch Hdmi 1/2/3 interface Main Unit rear viewRemote Control Unit Colored buttons RED/GREEN/YELLOW/BLUE DirectConnecting digital coaxial audio ConnectionsCoaxial cable Coaxial HIFi SystemConnecting a Camcorder Connecting an Hdmi deviceConnecting Component Video Connecting a ComputerTo connect a device using component video To play component video from an external deviceConnecting a VCR for Recording Connecting HeadphonesTo record program Basic Operations Main Menu OverviewList of main menus to help you with operations To navigate through the OSD main menuTurning On/Off the Power Selecting the Input Signal SourceDisplaying the Information Banner Turning OnMemorizing the Channels Auto Channel SearchManual Searching for DTV programs Manual Fine Tuning Setting Audio SystemManual Searching for ATV programs Setting Favorite Channels Labeling ChannelsOpen the Programme Edit menu Channel List Management To skip unnecessary channelsTo sort channels To delete channelsChannel and Program Selection Picture Adjustment Customizing the PictureSound Adjustment Adjusting the VolumeAdjusting the Sound Using the volume buttons VOL+ and VOLStereo/Bilingual Selection for analog channels Audio Track Selection for digital channelsNicam Broadcast Selection IGR German stereo system BroadcastsSystem Setup System SetupLanguage Hearing ImpairedRating and Lock Setup Password SetupBlock Program Setup To create a new passwordParental Guidance Setup Lock Tuning SetupRestoring Factory Default Timer Setup Current Time SetupOn Timer Setup Time Zone SelectionTime Setup Off Timer SetupSleep Timer Setup Auto Sleep SetupEPG Operation OpereationTeletext & Subtitle TeletextSubtitle Screen Setup for D-SUBPC Mode Screen SetupItem, then press 4or OK to access Auto adjustTroubleshooting Remote control does not operateDouble images Lost password System will auto reset the password toSome items can’t be accessed Current input modeSpecifications LCD TV5944032490 Ver