Palsonic TFTV421080HD owner manual Antenna Connection, Speaker Connection, Power Connection

Preparations (continued)

Antenna Connection

INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used. The exact type and position of the antenna will depend upon your particular area.

TV REAR

RF

75-ohm coaxial cable (round cable)

Note

=It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave conditions.

=The antenna cable should not be bundled with the power cord.

Speaker Connection

Connect the speaker audio cable to the external speaker output jack on the unit matching the "+" and "-" ends of the cable.

Note

1.Unplug the TV set and all connected components before connecting the speakers. 2.The illustration may be different depending on model.

Power Connection

Insert the AC plug into a conveniently located AC outlet.

Note

=This product should be operated only from the type of power source indicated on the marking label. =Always unplug the AC cord from power outlet when not using for a long period of time.

5