American Power Conversion VT ISX manual Restart, Power application

Restart

Start-up is included with the UPS, and the start-up procedure described here is only applicable if the UPS requires a subsequent start-up.

Note

Power application

Only trained personnel familiar with the construction and the equipment may carry out the restart procedure.

Warning

Set the utility breaker to the ON position.

If your installation includes an XR Battery Enclosure (SUVTBXR2B6/SUVTBXR6B6) with a DC disconnect switch, set the DC disconnect switch to the ON position.

Wait approximately 30 seconds for the system to boot up and carry out self test.

Note

After system boot-up, the display will automatically prompt you on how to confirm/select voltage and frequency as shown in the following.

990-2820A Smart-UPS® ISX 30-40 kVA, 400V Operation 27