American Power Conversion VT ISX manual Basic display navigation principles, Control functions

Overview – The Display

Basic display navigation principles

All illustrated display screens are examples only!

Note

On the display, press ESC until you get to the Overview Screen, which provides you with basic system status information.

Press UP, DOWN arrows to navigate with the selector arrow and view all sub-menu screens.

Chrg 100% Load 000% 230Vin 000Vout 50Hz Runtime: 0hr 0m

Overview Screen

Press ENTER to open the Main Menu screen. From here, you command, configure, and monitor the system.

Control	Logging
Status	Display
Setup	Diags
	Help

Main Menu

Control functions

From the Control Screen on the Main Menu, you can select the following functions:

1.Turn Load OFF/ON

2.Switch the UPS into Bypass/out of Bypass

Warning

Control	Logging
Status	Display
Setup	Diags
	Help

Main Menu

Disconnecting the UPS output to the load does NOT de-energize the UPS! Always follow the Total-Power-OFFprocedure if you need to de-energize the UPS in emergency situations!

Switch load OFF (disconnect the UPS output to the load equipment).

1.From the Main Menu, select Control and press ENTER

2.Use UP/DOWN key to navigate to Turn Load OFF, and press ENTER

3.Select YES, Turn Load OFF

8 Smart-UPS® ISX 30-40 kVA, 400V Operation 990-2820A