Configuration – Parts Replacement
Battery Module | APC Part No. |
|
|
1 Battery Module (4 batteries) | SYBT4 |
|
|
Network Management Card and Temperature/humidity Sensor | APC Part No. |
|
|
Network Management Card with temperature sensor | AP9619 |
Temperature/humidity Sensor | AP9512THBLK |
|
|
How to remove Battery Modules
Two people to lift a component weighing between 18 – 32 kg.
Follow the below procedures if you need to change or add a Battery Module, e.g. if you receive a display message reporting a bad battery, or if you need to add batteries for increased runtime.
When removing Battery Modules, start from the highest level and work down.
Note
Holding the battery handle, gently push the battery unit upwards and pull it halfway out of the Enclosure. A lock mechanism prevents it from being pulled all the way out.
21 |
