Motorola QIP7100 operation manual Connecting Your QIP Receiver to a Stereo TV SDTV and Stereo VCR

5 CONNECTING YOUR QIP RECEIVER

Connecting Your QIP Receiver to a Stereo TV (SDTV) and Stereo VCR

L/R audio		Video
connection		connection
			S-Video
		CableCARD
FiOS TV IN	RF TV OUT		Digital
		IR Remote	Audio
		Input
			Optical
			Audio
			Serial

Video

OutY

Audio

LeftPb

HDMI

Audio

RightPr

QIP7100

Ethernet
1394	SWITCHED
Firewire	105-125 V
USB	60 Hz
	4 A MAX
	500 W MAX

Coax Cable in

				VCR		Standard-Definition TV
						INPUT
	INPUT		OUTPUT			S-VIDEO
CABLE/	AUDIO	VIDEO	AUDIO	VIDEO
ANTENNA IN						VIDEO
					CABLE/	L
To TV
					ANTENNA IN	AUDIO
	L	R	L	R
						R

Connecting a Stereo TV (SDTV) and Stereo VCR

1.Connect a stereo audio cable to the AUDIO OUT L and R connectors on the QIP7100 Series receiver and the INPUT AUDIO L and R connectors on the stereo VCR.

2.Connect a video cable to the VIDEO OUT connector on the QIP7100 Series receiver and the INPUT VIDEO connector on the stereo VCR.

3.Connect a stereo audio cable to the OUTPUT AUDIO L and R connectors on the Stereo VCR and the INPUT AUDIO LEFT and RIGHT connectors on the Stereo TV (SDTV).

4.Connect a video cable to the output video connector on the stereo VCR and the input video connector on the Stereo TV (SDTV).

Note: You can also connect using the S-Video connectors if supported by your stereo VCR.

These video connection methods do not support HD video. If you have an HDTV, see Connecting your QIP Receiver to an HDTV — Video Only on page 15.

23