Memorex MVR2040-A owner manual Setting the Video Channel, Switch Rear of the VCR to

SETTING THE VIDEO CHANNEL

To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel).

When a TV is connected with an antenna cable only.

1	Turn ON the VCR POWER
	button.

POWER

2	Set the 3/4 Channel selector
	switch (Rear of the VCR) to
	CH 3 or 4.
		CH
	3		4

3	Turn ON the TV and set to
	CH 3 or 4 to correspond

with the channel selected in 2 .

3 OR 4

ENGLISH

1

INPUT

						REW	REC/OTR
		SPEED
AUTO	MENU				STOP
		–
	–		SET				ENTER
SEARCH	TRACKING				+
			+			CANCEL
SKIP
	CLOCK/			TIMER
COUNTER						REC

			1	POWER
			4	2
	7
			5	3
CALL			8
				6
		0
SELECT			9
	SLOW		TV/VCR
			COUNTER
PLAY				RESET
			PAUSE/STILL
		F.
			FWD

EJECT CHANNEL

+

–

4

5

4	Press the TV/VCR selector button to select the
	VCR position.

TV/VCR

The VCR indicator will light in the display.

For a push-button TV tuner

5	Select any channel to receive a TV station in
	your area.

CHANNEL CH 125

The channel number will appear on the screen and display about 4 seconds.

If CH 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR 3/4 channel selector and the TV to CH 3 or 4, play back a prerecorded tape and tune the TV to receive a sharp color picture from the video cassette recorder. Refer to your TV owner's manual for details.

23

4C80401A-E(P20-29) 23 25/2/99, 21:26