Memorex MVR2040-A owner manual To Correct the Settings, CH 125 or

4	Set the start time, end time, channel and tape
	speed as in step 3.

– SET + ENTER

TIMER REC SET
DATE	26	(WED)
START	11	: 00 PM
END	11	: 30 PM
CH	25
SPEED	SLP

〈+/–/ENTER/CANCEL/MENU〉

5	Press the ENTER button to accept them.
	To enter other programmes, repeat step 2
	through 4. Or, press the MENU button twice to
	return to the normal screen.

ENTER	MENU
	DATE	START	END	CH
	26 (WE) 11:00PM 11:30PM			25 SLP
	– – – – –	– – : – –	– – : – –	– – –
	– – – – –	– – : – –	– – : – –	– – –
	– – – – –	– – : – –	– – : – –	– – –
	– – – – –	– – : – –	– – : – –	– – –
	– – – – –	– – : – –	– – : – –	– – –
	– – – – –	– – : – –	– – : – –	– – –
	– – – – –	– – : – –	– – : – –	– – –
	〈+/–/ENTER/CANCEL/MENU〉

ENGLISH

5

4

INPUT

						REW	REC/OTR
		SPEED
AUTO	MENU				STOP
		–
	–		SET				ENTER
SEARCH	TRACKING				+
			+			CANCEL
SKIP
	CLOCK/			TIMER
COUNTER						REC

			1	POWER
			4	2
	7
			5	3
CALL			8
				6
		0
SELECT			9
	SLOW		TV/VCR
			COUNTER
PLAY				RESET
			PAUSE/STILL
		F.
			FWD

EJECT CHANNEL

+

–

5

6

6	Press the TIMER REC button. The power will go
	off, the Timer Record indicator will light and the

VCR stands by for recording.

TIMER REC

To cancel timer recoreding, press the button again and the Timer Record indicator will go out.

TO CORRECT THE SETTINGS

While setting, press the ENTER button to flash the item to correct, then re-enter the setting with the SET + or – button.

When finished, press the ENTER button.

NOTES: •The VCR cannot be used while the Timer Record indicator is lit.

•After a power failure or disconnection of the power plug, all programmed recording settings must be reset upon resumption of power. In this case, reset the clock (see page 25) and reprogram any timer recordings.

•Press the CANCEL button to move cursor backward for correction.

•To record from external source set the channel to "L1" or "L2". "L1" and "L2" will appear next to	39
CH 125 (or 69).

4C80401A-E(P34-39) 39 25/2/99, 21:43