Memorex MVD4543 manual Setting the Channel Menu

SETTING THE CHANNEL MENU

2

1

Enter the VCR mode and the Setup screen as described on page 24; the Setup menu will appear. Scroll to Channel Set using the Navigation ( ) button . Press the OK button

to select it; the Channel†menu will1appear.2

2

1

Press the Navigation (†) button 1 to select the
“Antenna/Cable” input option and press the OK button	2
repeatedly to select “Antenna” or “Cable”.

2

3 1

TO AUTO PRESET CHANNELS: To automatically program all strong stations in, scroll to Auto Preset using the Navigation ( ) button . Press the OK button to select it; the unit will†start memorizing1 channels. (“Please2 Wait” will appear on the screen.)

NOTE: To cancel searching, press the SETUP button 3 .

1

3

1

2

Press the Navigation ( ) button to select the Manual Set option. Press the Number† buttons1 to enter the channel number which you want to Add or2Erase. Press the OK button 3 repeatedly to select "Add" or "Erase".

Add–channels that are added can be accessed using the Navigation/Channel Up/Down ( , ) buttons 1. Erase–channels that are erasedπcannot† be accessed using the Navigation/Channel Up/Down ( , ) buttons 1.

NOTE: For CABLE, to enter a channelπ † number over "99”, press the 100 button first, then enter the second and third digits of the channel number; i.e., for Channel 105, press the 100 button, then press the "0" and "5" Number buttons.

27