Memorex MVD4543 manual Setting the VCR Options

SETTING THE VCR OPTIONS

2

1

Enter the VCR mode and the Setup screen as described on page 24; the Setup menu will appear. Scroll to OPTION using the Navigation ( ) button . Press the OK button

to select it; the Option †menu will appear1 .2

2

1

3

Press the Navigation ( ) button to select OSD Display. Press the OK button 2 †to turn the OSD1 On or Off.

If OSD is turned On, you can press the DISPLAY button twice when in the VCR mode and the OSD will always3 appear on the screen.

2

1

Press the Navigation ( ) button to select Auto Power Off. Press the OK button †to turn the1Auto Power Off option On (Yes) or Off (No). When2 set to ON (Yes), while in VCR or DVD mode, the unit will automatically turn off after 30 minutes when both the VCR and DVD are not being used.

NOTE: There is no Auto Power Off function for the TV mode.

2

1

Press the Navigation ( ) button to select Output Channel. Press the OK button† to set1the output channel to

3 or 4.2

This setting is for the TV channel of the VCR output when using the RF output to the TV.

2

1

Press the Navigation ( ) button to select ACS Set. Press the OK button 2 to turn†the ACS 1SET option On or Off. When you turn the ACS (Auto Clock Setting) function ON, each time when you turn the unit off to Standby mode, the Auto Clock function will automatically set the built-in clock (Month, Day, Year and Time) if the VCR is connected to an Antenna or Cable system. The Auto clock needs several minutes to set itself.

NOTE:

• If you use a cable box and you want the auto clock adjustment to be performed, the cable box must be left on.

32