Memorex MT2252S MT2271S Troubleshooting Guide, Accessories, Symptoms Possible Solutions

TROUBLESHOOTING GUIDE

Before requesting service, please refer to the following chart for the symptom and possible solution.

SYMPTOMS	POSSIBLE SOLUTIONS
	• Make sure the power cord is plugged in.
TV does not	• Try another AC outlet.
operate	• Power is off, check fuse or circuit breaker.
	• Unplug unit for an hour, then plug it back in.
	• Station or CATV experiencing problems,
Poor sound	tune to another station.
	• Check sound adjustments (Volume and Muting).
or No sound
	• Check for sources of possible interference.
	• Station or CATV experiencing problems,
	tune to another station.
Poor picture	• Make sure channels are set into memory.
	• Check antenna or CATV connections, adjust
or No picture
	antenna.
	• Check for sources of possible interference.
	• Check picture control adjustments.
	• Station or CATV experiencing problems,
Poor	tune to another station.
reception on	• Make sure channels are set into memory.
some	• Station is weak, adjust antenna to receive
channels	desired station.
	• Check for sources of possible interference.
	• Station or CATV experiencing problems,
	tune to another station.
Poor color or	• Make sure channels are set into memory.
	• Check picture control adjustments.
no color	• Check antenna or CATV connections, adjust
	antenna.
	• Check for sources of possible interference.
	• Station or CATV experiencing problems,
Picture	tune to another station.
wobbles or	• Make sure channels are set into memory.
drifts	• CATV company is scrambling signal.
	• Adjust antenna.

SYMPTOMS	POSSIBLE SOLUTIONS
	• Check all CATV connections.
No CATV	• Set TV/CATV menu option to the CATV mode.
reception	• Station or CATV system problems, try
	another station.
Horizontal or	• Check antenna connections, adjust or
diagonal bars	re-direct antenna.
on screen	• Check for sources of possible interference.
No reception	• Make sure TV/CATV menu option is in the
above	appropriate mode.
channel 13	• If using antenna, check UHF antenna connections.
	• Batteries are weak, dead or inserted incorrectly.
	• Remote is out of range, move closer to TV
No Remote	(within 15 feet).
	• Make sure Remote is aimed at sensor.
operation
	• Confirm there are no obstructions between
	the Remote and the TV.
	• Make sure the power cord is plugged in.
No reception	• Reset your password.
	• No broadcast on station tuned.
TV shuts off	• Sleep Timer is set.
	• Power interrupted.
	• TV station experiencing problems or program
Closed -	tuned is not closed captioned. Try another channel.
	• Check CATV connection or VHF/UHF
Caption is
	antenna, reposition or rotate antenna.
not activated.
	• Press TV/CAP/TEXT button to turn on the
	closed caption decoder.
Display is not
shown in your	• Select proper language in the menu options.
language.

ENGLISH

SPECIFICATIONS

Model			MT2252S	MT2271S
AC Power Input:	120V, 60Hz
AC Power Consumption:	110 Watts			115 Watts
Chassis Construction:	IC Solid state
Picture Tube:	25" (measured diagonally)			27" (measured diagonally)
Horizontal resolution:	260 lines
Audio Power Output Rating:	2.5 + 2.5 Watts
Speaker:	1-1/2" x 2-11/16" Full Range, 8 ohm x 2
Tuner Type:	181 Channel, Quartz PLL Frequency Synthesized
Remote Control:	Infrared, Direct Access, 2 x AAA batteries (not supplied)
Receiving Channels:	VHF	2-13
	UHF	14-69
	CATV	01-97	(5A)-(A-3)
		98-99	(A-2)-(A-1)
		14-22	(A)-(I)
		23-36	(J)-(W)
		37-65	(AA)-(FFF)
		66-125 (GGG)-(125)
Antenna Input Impedance:	75 Ohm (VHF/UHF/CATV) Coaxial Input
Input/Output:	S-Video Y-Input : 1.0Vp-p/75 ohm
		C-Input : 0.3Vp-p/75 ohm
	Video:	In (RCA) 1.0Vp-p/75 ohm
		Out (RCA) 1.0Vp-p/75 ohm
	Audio:	In (RCA) –8dB/50K ohm
		Out (RCA) –8dB/1K ohm
Dimensions:	24-5/16" (W) x 19-13/16" (D) x 20-11/16" (H)			25-9/16" (W) x 18-13/16" (D) x 22-1/16" (H)
Weight:	59.9 Ibs			77.6 Ibs

ACCESSORIES

Remote Control 11

3L40901A-E 11 11/3/2002, 12:05