B Click the “Advanced” tab.
C Select the sampling rate and bit rate to be applied to the D/A converter.
0It is recommended that “2 channel, 24 bit, 192000 Hz (Studio Quality)” is selected.
D Click “Apply”.
E Click “Test”.
0Check that audio from this unit is output from the PC.
Digital Audio Interface Properties
General Supported Formats Levels Advanced | w |
|
|
|
|
| |||
| Default Format |
|
|
|
|
|
|
| |
|
|
|
| t |
|
|
| ||
|
| Select the sample rate and bit depth to be used when |
| ||||||
|
| running |
| ||||||
|
| in shared mode. |
|
|
|
|
|
|
|
|
| 2 channel, 24 bit, 192000 Hｚ (Studio Quality) | Test | ||||||
|
| 2 channel, 24 bit, 44100 Hｚ (Studio Quality) |
|
|
|
|
| ||
|
| 2 channel, 24 bit, 48000 Hｚ (Studio Quality) |
|
|
|
|
| ||
|
| 2 channel, 24 bit, 96000 Hｚ (Studio Quality) |
|
|
|
|
| ||
|
|
|
| e |
| ||||
|
| 2 channel, 24 bit, 192000 Hｚ (Studio Quality) |
|
|
| ||||
|
| Allow applications to take exclusive control of this device |
|
|
| ||||
|
| Give exclusive mode applications priority |
|
|
|
| |||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| ||
|
| Restore Defaults |
|
|
|
| r |
| |
|
| OK | Cancel | Apply | |||||
|
|
|
|
|
|
|
|
|
|
NOTE
0The dedicated driver must be installed in the PC before this unit is connected to a PC. Operation will not occur correctly if connected to the PC before the dedicated driver has been installed. Moreover, if the PC is running Windows XP as its OS, the PC’s speed will decrease significantly, and a PC restart may be required.
0Operation may fail in some PC hardware and software configurations.
Front panel | Display | Rear panel | 34 | Remote | Index |