Marantz HD-DAC1 owner manual No sound comes out, Sound is interrupted or noise occurs

Page 55

Contents

Connections

Playback

Settings

Tips

Appendix

oNo sound comes out

Symptom

 

Cause / Solution

Page

No sound is produced. Or

0

Check the connections for all devices.

15

sound is distorted.

 

 

 

0

Insert connection cables all the way in.

 

0

Check that input connectors and output connectors are not reversely connected.

 

0

Check cables for damage.

 

0

Check the amplifier’s functions and controls and adjust as necessary.

 

0

Check that a proper input source is selected.

26

 

0

The volume is set to the minimum level. Adjust the volume to a suitable level.

26

 

0

Cancel the mute mode.

26

 

0

Switch “AMP Gain” to “Mid” or “High” if using headphones with high impedance or low sensitivity.

When the volume is

0

If the “AMP Gain” setting is “High” or “Mid”, switch it to “Low”.

49

increased, sound from the

 

 

 

audio output connectors

 

 

 

(VARIABLE) is distorted.

 

 

 

o Sound is interrupted or noise occurs

Symptom

Cause / Solution

Page

Sound is interrupted during

0 Do not start applications other than the player software while playing music on your computer.

playback of tracks saved

 

 

on a computer.

 

 

Front panel

Display

Rear panel

55

Remote

Index

Image 55
Contents HD-DAC1 Connections Playing back an iPod Using as a D/A converterContents Tips Troubleshooting Basic operationAccessories Operating range of the remote control unit About the remote controlInserting the batteries High quality sound Main featuresHigh performance Equipped with variable audio output connectors Front panel Part names and functionsHeadphones jack Phones Setup buttonRemote control sensor Display OFF indicatorDisplay A converter display IPod/USB playback indicatorRear panel Remote control unit Back button Power buttonInformation button Info Cursor buttons uio pMute button Volume buttons dfRepeat button L Stop buttonCables used for connections ContentsPre Amplifier Power amplifier Connecting an amplifierCD Transport Digital device Connecting to a device with digital audio output connectorsPlayer software are installed Connecting a PC or MacSmartphone Portable player Connecting a smartphone or portable playerIPod Connecting an iPod or USB memory device to the USB portIPod classic IPod nano IPod touch IPhone Supported iPod/iPhone modelsSetting Remote Control jackConnection Connecting the power cord Playback Switching the power to standby Turning the power onBasic operation Selecting the input source Adjusting the volumeTurning off the sound temporarily Muting Press Dimmer Switching the display’s brightnessOPT2 Using as a D/A converterDisconnectunit. the USB cable between your PC Connecting and playing back from a computer USB-DACInstalling the dedicated driver Windows OS only Computer recommended systemSettings Tips Appendix Install the driver Software Licensing Agreement Settings Tips Appendix Press the input source select button USB-DAC to Press Power Checking audio outputChannel, 24 bit, 192000 H z Studio Quality Audio Device Settings Mac OS X only Playback PressDAC.USB-DAC to switch the input source to USBFiles that can be played back Coax OPT1 OPT2 Connect and playback from a digital device COAX/OPT1/OPT2Back Playing back an iPodPress and hold Playing an iPodIPod operation Operation buttons FunctionUse ui to select the file to be played, then press Setting operation mode Remote iPod modeSwitching the display Press ModePress Repeat L Performing repeat playbackPerforming random playback Charging the iPodMP3 Playing a USB memory deviceResume function When Folder is selectedWhen All is selected Playing files stored on USB memory devicesUSB operation Performing repeat playback Play the component connected to this unit Playing audio from devices connected to the AUX connectorMenu map Mode for more than 30 minutesMenu operation Use o p to change to desired settingDimmer AMP GainIPodMode Off Disable Auto Standby mode Default Enable Auto Standby modeAutoStby Contents Want to playback WAV files TipsWant to enjoy analog output audio at higher quality Want to playback just the specified folderPower does not turn on / Power is turned off TroubleshootingSymptom Cause / Solution Display on this unit shows nothing Sound is interrupted or noise occurs No sound comes outIPod cannot be played back PC or Mac files cannot be played backUSB memory devices cannot be played back Sound is distorted when AUX is used Compatible formats Playing back a USB memory devicesUSB-compatible file systems Tag dataPlayback order of files About folders and files How to handle mediaBit length Specifications of supported files USB-DACConverter Coaxial/OpticalExplanation of terms Bit rate Dynamic rangeTrademark information Audio performance SpecificationsGeneral Weight 11 lbs 5 kg Audio cable IndexWAV WMA Holdings Inc 10360 00AM
Related manuals
Manual 15 pages 50.97 Kb