Marantz HD-DAC1 owner manual Press Power Checking audio output

	Contents	Connections	Playback		Settings	Tips	Appendix
6	Press POWER X.			9	Checking audio output.
	0 When the unit power is turned on, the PC automatically finds and				Outputs a TEST signal from the PC and checks the audio output
	connects to the unit.				from the USB-DAC function.
7	Press the input source select button (USB-DAC) to				A Select “Digital Audio Interface” and click “Properties”.
					0 The Digital Audio Interface Properties window is displayed.
	switch the input source to “USB-DAC”.
8	Checking the installed driver.				Sound
					Playback Recording Sounds	Communications
	A Click the “Start” button and click “Control Panel” on the PC.				Select a playback device below to modify its settings：

0 The control panel setting list is displayed.	DigitalDig Audioudio InterfaceInte
B Click the “Sound” icon.	DefaultDefault DeviceDevice
0 The sound menu window is displayed.	Speakers
C Check that there is a checkmark next to “Default Device” under in	Ready
“Digital Audio Interface” of the “Playback” tab.

0 When there is a checkmark for a different device, click	q
“Marantz USB Audio” and “Set Default”.

Configure Set Default

Properties

OK Cancel Apply

Front panel Display Rear panel 33 Remote Index