Meridian America manual Configuring the 596 DVD Player, To configure specific options

Page 60

Configuring the 596 DVD Player

To configure specific options

●Highlight Meridian setup in the Setup menu, and press Enter.

The Meridian setup menu will be displayed:

To set configuration options

The configuration options are generally set to an appropriate value when you reset the 596 to the standard settings, and you should not normally need to alter them; see Choosing standard settings, page 52.

The options are summarised in the following table for advanced use:

Option	Default	Description
Diagnostics	No	Set to Yes for a diagnostic
		display on the front-panel
		display.
System address	1	Set to a value from 1 to 8.
Product address	1	Set to a value from 1 to 8.
Controller	Auto	Specifies whether the DVD
		player is controller, not
		controller, or set automatically.
Start source	DVD	Specifies which source is
		selected when switching on from
		standby.
Vol display	No	Specifies whether the DVD
		player displays the volume for
		the system.
Fan	As	Set to Always to keep the fan
	required	permanently on, or As required
		to use it when necessary.
Source config		Allows you to configure the
		sources; see below.

Configuring the DVD player

53

Image 60

Contents Meridian 596 DVD Player Meridian 596 DVD Player User Guide PrefaceSales and service in the UK Contents Setting default options Setting up the DVD Player41Configuring the DVD Player51 Troubleshooting Preface Introduction Professional features Meridian 500 SeriesSeries communications Sample configurations Meridian Digital TheatreMeridian Digital Music System Specification and accessories SpecificationAvailable accessories Using the DVD player Using the DVD player Front panelMeridian System Remote ˘ Scan forwardTo switch on from standby Playing a discTo insert a disc To switch to standby To play the discTo move to the next or previous chapter or track To move to the next or previous album MP3 discs onlyLocating a specific title, chapter, or track To play starting from a particular chapter or trackTo locate a chapter or track by number To locate a title by number To play from a specified timecodeStopping, pausing, and resuming play Disc information To change the front panel displayTo display disc information on screen To display information about DVD video disc features To turn off the on-screen displayAdvanced features To select a title using the title menu Selecting options from a menuTo select an option from the disc menu Fast and slow-motion play To play DVD video discs or audio CDs faster than normalTo play DVD video discs in slow motion To resume normal speedPlaying repeatedly To repeat a title, chapter, or trackTo repeat a specific section of a disc Selecting a playback audio setting To select the audio settingTo display the current audio setting To display the current subtitle setting Displaying subtitlesTo select the subtitle language To turn subtitles on or offSelecting the camera angle To display the camera angleTo select or change the camera angle Setting the parental lock To set the parental lockTo change the password Advanced features Setting default options Setting default options To display the Setup menuTo exit from the setup menus To select an option from a menuTo return to the previous menu Selecting the default languages To select the default soundtrack languageTo set the default subtitle language To select the disc menu language Selecting the display settings To set the default picture formatTo select the video output format Component version To select the black level To select closed caption subtitlesTo select the TV standard To select the screensaver timeouts To set up Scart switchingSetting default options Selecting the audio settings To select the digital audio formatTo select Meridian High Resolution To select the audio output rateSetting default options Setting up the DVD player Unpacking Radio interferenceSafety warnings Positioning the DVD playerTo avoid interference To avoid overheatingBack panel Video outputsVideo connections Audio connections Communications connectionsConnecting video Connecting using component videoConnecting using S-video Connecting using composite videoConnecting audio To connect to a Meridian 561 Digital Surround ProcessorTo connect to Meridian DSP loudspeakers Connecting to other Meridian equipment To connect to other Meridian 500 Series equipmentConfiguring the DVD player Choosing standard settings To restore the standard settingsConfiguring the 596 DVD Player To configure specific optionsTo set configuration options To configure the sources Troubleshooting Troubleshooting No lights are displayed when switching onThere is no sound when playing a disc Video picture is monochromeVideo picture is bright blue or pink Picture whites appear greenOn-screen display shows Wrong Region Code Question-mark symbol is displayed on the on-screen display Creating MP3 discsMaintenance CleaningTo clean the case, display panel, and keypad To clean the audio and video connectionsService and guarantee ServiceGuarantee Index Digital OUTScart Wrong Region Code Index