Meridian America 596 manual Troubleshooting, No lights are displayed when switching on

Page 63

Troubleshooting

Troubleshooting

56

No lights are displayed when switching on

❍Check that your AC power supply is connected correctly.

❍Check that the ON/OFF switch on the back panel is in the ON position.

There is no sound when playing a disc

❍Check that your preamplifier is switched on, and the volume is at an appropriate level.

❍Check that the DVD player is connected correctly to the other components of your system; see Setting up the DVD player, page 41.

❍Check that the correct source has been selected on your preamplifier.

❍Try playing another disc. If this disc works, check the problem disc for signs of dirt or damage.

❍If you are using the DVD player with a preamplifier or active loudspeakers check that the Digital audio format menu option is set to PCM; see To select the digital audio output format, page 38.

There is interference on the radio and/ or television when the DVD player is switched on

Before following the steps below, ensure all units are switched off.

If this equipment does cause or suffer from interference to/from radio or television reception then the following measures should be tried:

❍Reorient the receiving aerial (or antenna) or route the antenna cable of the receiver as far as possible from the 596 DVD Player and its cabling.

❍Ensure that the receiver uses well-screened antenna cable.

❍Relocate the receiver with respect to the DVD player.

❍Connect the receiver and this product to different AC outlets.

The video picture is monochrome

If you are using the S-Video output, make sure that S is selected in the Video output menu

Otherwise, check your video cabling.

Image 63

Contents Meridian 596 DVD Player Preface Meridian 596 DVD Player User GuideSales and service in the UK Contents Setting default options Setting up the DVD Player41Configuring the DVD Player51 Troubleshooting Preface Introduction Professional features Meridian 500 SeriesSeries communications Meridian Digital Theatre Sample configurationsMeridian Digital Music System Specification Specification and accessoriesAvailable accessories Using the DVD player Front panel Using the DVD player˘ Scan forward Meridian System RemoteTo switch on from standby Playing a discTo insert a disc To move to the next or previous album MP3 discs only To switch to standbyTo play the disc To move to the next or previous chapter or trackLocating a specific title, chapter, or track To play starting from a particular chapter or trackTo locate a chapter or track by number To play from a specified timecode To locate a title by numberStopping, pausing, and resuming play Disc information To change the front panel displayTo display disc information on screen To turn off the on-screen display To display information about DVD video disc featuresAdvanced features To select a title using the title menu Selecting options from a menuTo select an option from the disc menu To resume normal speed Fast and slow-motion playTo play DVD video discs or audio CDs faster than normal To play DVD video discs in slow motionPlaying repeatedly To repeat a title, chapter, or trackTo repeat a specific section of a disc Selecting a playback audio setting To select the audio settingTo display the current audio setting To turn subtitles on or off To display the current subtitle settingDisplaying subtitles To select the subtitle languageSelecting the camera angle To display the camera angleTo select or change the camera angle To set the parental lock Setting the parental lockTo change the password Advanced features Setting default options To display the Setup menu Setting default optionsTo exit from the setup menus To select an option from a menuTo return to the previous menu Selecting the default languages To select the default soundtrack languageTo set the default subtitle language To select the disc menu language Selecting the display settings To set the default picture formatTo select the video output format Component version To select closed caption subtitles To select the black levelTo select the TV standard To set up Scart switching To select the screensaver timeoutsSetting default options To select the digital audio format Selecting the audio settingsTo select the audio output rate To select Meridian High ResolutionSetting default options Setting up the DVD player Radio interference UnpackingTo avoid overheating Safety warningsPositioning the DVD player To avoid interferenceVideo outputs Back panelVideo connections Communications connections Audio connectionsConnecting using composite video Connecting videoConnecting using component video Connecting using S-videoTo connect to a Meridian 561 Digital Surround Processor Connecting audioTo connect to Meridian DSP loudspeakers To connect to other Meridian 500 Series equipment Connecting to other Meridian equipmentConfiguring the DVD player To restore the standard settings Choosing standard settings Configuring the 596 DVD Player To configure specific options To set configuration options To configure the sources Troubleshooting Video picture is monochrome TroubleshootingNo lights are displayed when switching on There is no sound when playing a discVideo picture is bright blue or pink Picture whites appear greenOn-screen display shows Wrong Region Code Creating MP3 discs Question-mark symbol is displayed on the on-screen displayTo clean the audio and video connections MaintenanceCleaning To clean the case, display panel, and keypadService and guarantee ServiceGuarantee Digital OUT IndexScart Wrong Region Code Index