Meridian America 596 manual To configure the sources

Page 61

Configuring the DVD player

54

To configure the sources

If you are using the 596 DVD Player as the controller in your Meridian system, you can use the Source config option on the Meridian Setup menu to configure each of the sources in your system.

●Highlight Source config in the Meridian Setup menu, and press Enter.

The Source configuration menu is displayed:

For each source you want to configure:

●Press the source key on the remote corresponding to the source you want to configure.

The Category, Address, and SCART switch options show the current values defined for that source. The SCART switch option only appears with the SCART version of the 596.

To change any option:

●Highlight the corresponding option in the Source configuration menu and press Enter, select the value you want to use, and press Enter to select it.

The Category identifies the type of Meridian product selected by the corresponding source. Specify -Cfor the current product, 1C for a Meridian CD player, 2C for a Meridian tuner, 3C for another Meridian DVD player, or NC for a non Meridian product such as a TV.

Normally the Address should be set to 1A. However if you have more than one Meridian product of the same type in your system you can use different source keys to select between them by assigning them different addresses. For example if you have two Meridian DVD players, assign one of them address 1A and the other address 2A.

For information about using the SCART switch option see To set up SCART switching, page 36.

Image 61

Contents Meridian 596 DVD Player Preface Meridian 596 DVD Player User GuideSales and service in the UK Contents Setting up the DVD Player41 Setting default optionsConfiguring the DVD Player51 Troubleshooting Preface Introduction Meridian 500 Series Professional featuresSeries communications Meridian Digital Theatre Sample configurationsMeridian Digital Music System Specification Specification and accessoriesAvailable accessories Using the DVD player Front panel Using the DVD player˘ Scan forward Meridian System RemotePlaying a disc To switch on from standbyTo insert a disc To play the disc To switch to standbyTo move to the next or previous chapter or track To move to the next or previous album MP3 discs onlyTo play starting from a particular chapter or track Locating a specific title, chapter, or trackTo locate a chapter or track by number To play from a specified timecode To locate a title by numberStopping, pausing, and resuming play To change the front panel display Disc informationTo display disc information on screen To turn off the on-screen display To display information about DVD video disc featuresAdvanced features Selecting options from a menu To select a title using the title menuTo select an option from the disc menu To play DVD video discs or audio CDs faster than normal Fast and slow-motion playTo play DVD video discs in slow motion To resume normal speedTo repeat a title, chapter, or track Playing repeatedlyTo repeat a specific section of a disc To select the audio setting Selecting a playback audio settingTo display the current audio setting Displaying subtitles To display the current subtitle settingTo select the subtitle language To turn subtitles on or offTo display the camera angle Selecting the camera angleTo select or change the camera angle To set the parental lock Setting the parental lockTo change the password Advanced features Setting default options To display the Setup menu Setting default optionsTo select an option from a menu To exit from the setup menusTo return to the previous menu To select the default soundtrack language Selecting the default languagesTo set the default subtitle language To select the disc menu language To set the default picture format Selecting the display settingsTo select the video output format Component version To select closed caption subtitles To select the black levelTo select the TV standard To set up Scart switching To select the screensaver timeoutsSetting default options To select the digital audio format Selecting the audio settingsTo select the audio output rate To select Meridian High ResolutionSetting default options Setting up the DVD player Radio interference UnpackingPositioning the DVD player Safety warningsTo avoid interference To avoid overheatingVideo outputs Back panelVideo connections Communications connections Audio connectionsConnecting using component video Connecting videoConnecting using S-video Connecting using composite videoTo connect to a Meridian 561 Digital Surround Processor Connecting audioTo connect to Meridian DSP loudspeakers To connect to other Meridian 500 Series equipment Connecting to other Meridian equipmentConfiguring the DVD player To restore the standard settings Choosing standard settingsTo configure specific options Configuring the 596 DVD PlayerTo set configuration options To configure the sources Troubleshooting No lights are displayed when switching on TroubleshootingThere is no sound when playing a disc Video picture is monochromePicture whites appear green Video picture is bright blue or pinkOn-screen display shows Wrong Region Code Creating MP3 discs Question-mark symbol is displayed on the on-screen displayCleaning MaintenanceTo clean the case, display panel, and keypad To clean the audio and video connectionsService Service and guaranteeGuarantee Digital OUT IndexScart Wrong Region Code Index