Iomega EP510 Explosion & DUST-IGNITION Proof Certifications, Nema 4X, Replacement Cover O-RINGS

AM-4109/1104 IP510, EP510, IP511, EP511 SERIES

EXPLOSION & DUST-IGNITION PROOF CERTIFICATIONS

FACTORY MUTUAL and CANADIAN STANDARDS ASSOCIATION

WARNING: The following ratings are valid ONLY WHEN the cover is installed for FM and CSA. BOTH the cover and the locking device, using tamper resistant screws must be installed. Screws are to be removed and installed with a special driver bit (supplied). In case of a need for replacement parts, follow TABLE 4.

EXPLOSION PROOF FOR CLASS I, DIV 1, GROUP B, C, D.

DUST-IGNITION PROOF FOR CLASS II, DIV 1, GROUP E, F, G.

SUITABLE FOR CLASS III LOCATIONS.

TABLE 3: NEMA 4X, REPLACEMENT COVER O-RINGS

PART NAME	PART NUMBER
O-RING SEAL, VITON	214-649-000-242
O-RING SEAL, BUNA-N	214-649-000-240

TABLE 4: NEMA 4X, REPLACEMENT PARTS FOR COVER LOCKING DEVICE

PART NAME	PART NUMBER
LOCKING CLAMP	224-669-000-016
TAMPER-PROOF SCREW	214-648-000-401
DRIVER BIT	010132-000

8