Chapter 9 >> Setting the System
VFD Clock
> S y s t e m
Language | English |
Time Setting |
|
Change Password |
|
CI |
|
PC |
|
DT V Setup |
|
Panel Off | Disable |
VFD Clock | Enable |
Default Setting |
|
Move | Select |
You can set to display the current time on VFD in standby mode.
1Press the MENU button.
2Select SystemXVLQJWKHŸźEXWWRQDQGSUHVVWKHOKRUŹEXWWRQ
3Select VFD ClockXVLQJWKHŸźEXWWRQ
4Select EnableXVLQJWKHŻŹEXWWRQ
In standby mode, the VFD will display the current time.
Note: If the Power On Time function is enabled, the clock icon on VFD will be enabled.
Default Settings
> S y s t e m
Language | English |
Time Setting |
|
Change Password |
|
CI |
|
PC |
|
DT V Setup |
|
Panel Off | Disable |
VFD Clock | Disable |
Default Setting |
|
Move | Enter |
You can set your TV settings to the default setting values.
Warning: Please note that once you perform the Default Setting, all data such DVDHULDOVHWWLQJLQIRUPDWLRQFKDQQHOOLVWDQGXVHUFRQ¿JXUHGGDWDDUHGHOHWHG
To perform Default Setting, do as follows:
1Press the MENU button.
2Select SystemXVLQJWKHŸźEXWWRQDQGSUHVVWKHOKRUŹEXWWRQ
3Select Default SettingXVLQJWKHŸźEXWWRQDQGSUHVVWKHOKRUŹEXWWRQ
The Enter Your Password dialog box is displayed.
4Enter your password using the NUMBER(0~9) buttons to change all settings value to the factory default.
5Default setting is completed.
Notes :
1.The default password is 0000. If you have forgotten your password, please contact your local TV distributor.
2.After completing the default setting, the initial setup wizard will appear automatically in a few seconds.