Chapter 12 >> Setting the Aspect Ratio
Setting the Aspect Ratio
You can select the modes by simply pressing the WIDE button on the remote control.
Auto > 4:3 > 14:9 > Full > Zoom
Notes
1.When the Component or HDMI input mode, you can select only the 4:3, 14:9 or Full.
2.It is not available in the PC input mode.
Auto
Displays the picture as the original aspect ratio of the signal you received.
4:3
Displays the picture in the 4:3 ratio. The black bar appears on each side.
4 : 3
14:9
Displays the picture in the 14:9 ratio. The thin black bar appears on each side.
14 : 9
Full
'LVSOD\VWKHSLFWXUHLQWKHUDWLRWR¿OOWKHHQWLUHVFUHHQ
Full
Zoom 'LVSOD\VWKHSLFWXUH]RRPHGWR¿OOWKHUDWLRZLWKEODFNVLGHEDUV7KHWRS
and bottom of the picture are slightly cropped.
Zoom